Engine ID Tag ?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=178881
Printed Date: 06 Nov 2025 at 2:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Engine ID Tag ?
Posted By: FREEDGUY
Subject: Engine ID Tag ?
Date Posted: 07 Mar 2021 at 3:19pm
| Have any of you guys re-attached the id plate back onto the block of (in this case) a 100 series engine ? How did you do it may I ask ? Thanks |
Replies:
Posted By: DSeries4
Date Posted: 07 Mar 2021 at 8:58pm
|
I've never removed one. You could probably drill out the old rivets inside the block if you are careful and then rivet it back on. Heck, my D21 doesn't even have a tag on it. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: FREEDGUY
Date Posted: 08 Mar 2021 at 5:57pm
Thanks for the reply. We did not "intentionally" remove it, it fell off while sitting at the fuel barrel  . What year/model did they attach the engine plate ?? I don't recall it on our D 15/17/19 ??
|
Posted By: Joe(TX)
Date Posted: 08 Mar 2021 at 6:22pm
|
The rivets can be pulled out if you can get a grip on them. I did it on my 190XT engine. Thy are drive type rivets. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |