Print Page | Close Window

needed 6060 seat

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=178783
Printed Date: 18 Dec 2025 at 5:06am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: needed 6060 seat
Posted By: allis1221G
Subject: needed 6060 seat
Date Posted: 03 Mar 2021 at 7:50pm
any body have a good place to to get a new seat for a 6060. like the original



Replies:
Posted By: victoryallis
Date Posted: 04 Mar 2021 at 5:07am
Cab or open station?

-------------
8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760


Posted By: allis1221G
Date Posted: 04 Mar 2021 at 7:07am
open station


Posted By: only AC orange
Date Posted: 04 Mar 2021 at 7:30am
X 2 - I need one also for an open station! Last I talked to Sandy Lake Imp., they didn't have access to them?


Posted By: WNYBill
Date Posted: 04 Mar 2021 at 8:31am
X3  Been looking, looks like something around $1500.  If you can find one.  I have resorted to duck tape.


Posted By: AC720Man
Date Posted: 04 Mar 2021 at 10:15am
Almost positive we ordered one through TSC that is almost identical to the original for less than $300. That was 10 years ago at least and still looks new.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: DSeries4
Date Posted: 04 Mar 2021 at 10:19am
I have been looking for one for my 6080 for the last several years.  The original seat was a Milsco brand and struck out everywhere I looked.  I ended up buying an aftermarket seat that looks and fit good.  Pretty happy with it.


-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080


Posted By: DougG
Date Posted: 04 Mar 2021 at 11:57am
Neighbor got one for a 6060 from TSC recently and it looks good and a real close factory look, it's an open station


Posted By: Leadoff
Date Posted: 04 Mar 2021 at 12:24pm
allis1221G/onlyACorange/WNYBILL

I am not a 6060/6080 owner, but perhaps this info could help you in your search.  The AGCO Parts Book shows a "Marathon Seat", page 164/6060, which was supplied to AC by the Milwaukee Seat Co (Milsco).  The seat comes with a black metal frame, arm rests, and pleated seat cushion/back rest. The Norm Swinford Book, page 130, has a pic of four 6060/6080 2WD/FWA tractors, all open station, with the "Marathon Seat".  The AGCO parts Book also shows an "Olympic" Seat (don't have any info on that seat)

Here is a pic of the Milsco Marathon Seat on my 185. I purchased the seat many years ago to replace the original seat supplied with the tractor in 1975.  It is an exact match

https://www.allischalmers.com/forum/uploads/16209/IMG_0042.JPG" rel="nofollow - uploads/16209/IMG_0042.JPG

I contacted Milsco many years ago to get info on the seat, and after much persuasion, they directed me to Serco Loaders, a forestry industry log loader manufacturer.  Serco fits their loaders with the Milsco Marathon seat.  You can purchase a replacement seat from their network of Dealers.  Several members on this Forum have successfully purchased replacement Marathon seats from Serco Dealers

Full Disclosure........I have no affiliation with Serco Loaders or any of their Dealers. I just want to pass on my info to help Forum members access an excellent product
Comment.......I do not understand why AGCO/Seat Suppliers/Forum Sponsors cannot access these seats as there is probably a decent market (unusual Serco would be only source)

Additional Info

This topic has surfaced numerous times and I have listed the Threads below(lots of background info)

Seat in 200......................................April 21/2017
200 Seat Rebuild .............................. .April 1/2019
200 Seat........................................January 20/2019
Help with Seat Cushion for 185...........April 4/2017

Good luck with your projects



-------------
1963 D17D Series III. 1965 D15 Series II. 1965 D17 Series IV. 1975 185. 1978 716H. 1979 716H. 1965 780 Harvester/1R&DC. 1957 Model 73 SC 4 Furrow Plow


Posted By: K bockting
Date Posted: 05 Mar 2021 at 5:28am
I bought a Grammer air ride suspension about $500 and seat from Tractor Supply well worth the $


Posted By: Amos
Date Posted: 05 Mar 2021 at 6:04am
Several years ago I put a universal skid steer seat from Shoup on mine.  It has stood up excellent, it is an open station tractor


Posted By: WNYBill
Date Posted: 05 Mar 2021 at 8:09am
I would like to replace the whole seat and suspension.... not just the seat.  I think the suspension is different on the 6000 series.

Doug, which seat did you buy at TSC?  And did it fit on the 6060 suspension without alteration.


Posted By: allis1221G
Date Posted: 07 Mar 2021 at 6:05pm
well i look at the seats at tsc. the one i was going to buy was 175.00. so was going to wait. went back 2 days later with the measurements and fond the premium seat with lots of mounting holes. hoping some of the holes will match up. well it fit perfact! just had to turn the back bracket around holes all match up and looks good like the old one. best part was it was on clerance for 50.00 what luck. found a gut who will re apostery the old one.


Posted By: AC720Man
Date Posted: 07 Mar 2021 at 8:53pm
Glad it worked out for you. The one we bought there was a perfect fit also, no modifications. Had the arm rest also which I am assuming it was a premium seat.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: DougG
Date Posted: 08 Mar 2021 at 6:53pm
Bill my neighbor bought it and it looked close to the orignal and the bolt holes matched i think , so which one did you guys get ?



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net