Ball hitch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=17865
Printed Date: 09 Sep 2025 at 8:49pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Ball hitch
Posted By: johninpalmyra
Subject: Ball hitch
Date Posted: 07 Sep 2010 at 4:38pm
| I am in need of the old type ball hitchs in order to pull a roto baler. |
Replies:
Posted By: Steve(SEMN)
Date Posted: 07 Sep 2010 at 5:49pm
| Anyone have a picture of one of these? |
Posted By: johninpalmyra
Date Posted: 07 Sep 2010 at 6:08pm
| Do you want a piture of the Roto baler or the ball hitch or both? |
Posted By: Rick of HopeIN
Date Posted: 07 Sep 2010 at 6:22pm
|
We did not have an Allis baler but seems like I remember they were also used on some corn choppers and pull type combines.
------------- 1951 B, 1937 WC, 1957 D14, -- Thanks and God Bless |
Posted By: CTuckerNWIL
Date Posted: 07 Sep 2010 at 6:33pm
|
I didn't have the ball and retainer for my #35 picker so I took the hitch off and bolted 2 flat pieces of steel to the picker tongue and drilled a hole in each. It works just fine without the ball. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: JoeO(CMO)
Date Posted: 07 Sep 2010 at 7:05pm
|
I have several NOS, never used ------------- |
Posted By: johninpalmyra
Date Posted: 07 Sep 2010 at 7:07pm
| so are they for sale? How much for one? |
Posted By: Steve(SEMN)
Date Posted: 07 Sep 2010 at 8:11pm
| A picture of the roto baler ball. |
Posted By: Bruce(IA)
Date Posted: 08 Sep 2010 at 7:13am
|
Is this what you want to see?
 |
Posted By: Ray
Date Posted: 08 Sep 2010 at 10:02am
|
$35.00 good,used,original.785-353-2392 |
Posted By: JoeO(CMO)
Date Posted: 09 Sep 2010 at 7:04pm
  I have these, NOS - $75. plus ride each
Cell 573.353.7329
------------- |
Posted By: mdefelice91171
Date Posted: 27 Jan 2015 at 10:30am
| Anyone still have the ball and ring side of one of these for sale? |
Posted By: Joe Graunke
Date Posted: 27 Jan 2015 at 2:36pm
|
I think you can still get from AGCO. Joe ------------- |
Posted By: Mikez
Date Posted: 27 Jan 2015 at 2:51pm
| What's the part numbers |
Posted By: mdefelice91171
Date Posted: 27 Jan 2015 at 3:01pm
| I found one from Darrel in ND, but I appreciate it. Any idea where I can find the pieces to connect the beam side of my Oxnard blade to the tongue side??? |