Farm Equipment - Agco Allis 5660

Print Page | Close Window

Agco Allis 5660

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=178563
Printed Date: 28 Jul 2025 at 12:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Agco Allis 5660

Posted By: Mdguy
Subject: Agco Allis 5660
Date Posted: 23 Feb 2021 at 8:19pm

Anybody on here have any experience with an Agco Allis 5660. I am considering looking at one tomorrow at a local dealer. It is a 4 wheel drive model with loader and around 1600 hours. Will mainly be used to put hay out and smaller chores around farm. Any issues with these machines if anybody has used or has one.

Thanks

Replies:

Posted By: Amos
Date Posted: 24 Feb 2021 at 4:51am

Dad has one 7000hrs now bought it new. Had trouble with high gear fork wore completely out. Weight of the gearshift would pull it out of 4th all the time engine governor was not set up properly from new. Put a new clutch in it last summer (first one) because the pto cable got seized and they kept running it. Put a couple final drives in the front end, expensive parts and the pinion shaft and coupler as splines wear out, grease the pivot bushing daily if you use the loader a lot. broke a couple pto output shafts, they just twist off it seems after time seems the tie rods are lighter than they need to be for a loader tractor front rims cracked out after about 5 years