Farm Equipment - New Idea—allis spreader???

Print Page | Close Window

New Idea—allis spreader???

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=178292
Printed Date: 29 May 2025 at 5:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: New Idea—allis spreader???

Posted By: Mikez
Subject: New Idea—allis spreader???
Date Posted: 12 Feb 2021 at 1:04pm

Hello everyone

Have a question. Which model spreaders shared similar parts between allis chalmers and new idea manure spreaders.thank you

Replies:

Posted By: dr p
Date Posted: 12 Feb 2021 at 4:25pm

I have a 110 and ni 17. They use the same rims and the same finger assembly. I have not checked but I bet it is the same table chain

Posted By: orangereborn
Date Posted: 12 Feb 2021 at 4:29pm

I have heard that the AC95 had parts that would interchange but never became aware of any that were an exact fit except for maybe chain or other standard parts...I have checked with some of the PA vendors and they could usually adapt something. Usually from one of the other two colors....Dale

Posted By: *DougW
Date Posted: 12 Feb 2021 at 7:23pm

I have an AC 95G that is very close to a New Idea 12A. Many parts appear to be the same.

Posted By: Mikez
Date Posted: 12 Feb 2021 at 11:36pm

thanks

Awhile ago we sold some new idea stuff to a allis spreader.

I was just wondering because iv been thinking of getting a new idea spreader and would hate to get rid of parts we might use.

Posted By: Kenny L.
Date Posted: 14 Feb 2021 at 6:27am

Mike, when I was looking for blade for the beater on my allis 95 I reached out to you and asked if you would've any because you had help me with part before and you had new ideal one that match my and that is what I used, I've not needed any other parts so that is all I can help with.