Help ID part.
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=178162
Printed Date: 27 Sep 2025 at 5:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Help ID part.
Posted By: Mikez
Subject: Help ID part.
Date Posted: 07 Feb 2021 at 8:35am
|
Hello everyone. Anybody recognize this clamp looking thing. I feel iv seen it before but having trouble remembering.   Thanks
|
Replies:
Posted By: Mikez
Date Posted: 07 Feb 2021 at 9:32am
 I also have this part number that isn’t in my book.
507521 has bushing in the envelope about 3/4”od.X7/16ld.X1-1/2L. Maybe someone has this number in one of your books. Thanks
|
Posted By: jiminnd
Date Posted: 07 Feb 2021 at 9:48am
|
Top one looks like mounting bracket for a corn cultivator shank, maybe too small thou. ------------- 1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner) |
Posted By: JoeO(CMO)
Date Posted: 07 Feb 2021 at 9:58am
|
Top are cultivator tool shank clamps(G or similar) Lower are spacer for sway chains, marker lift chains on lift latches Smaller drill planters and rear attachments ------------- |
Posted By: PaulB
Date Posted: 07 Feb 2021 at 12:01pm
|
The B/C pickup plow has a mount for the coulter that looks like that. What is the size of the rail it goes up against? The B (60 series) cultivators also used something like that. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: Mikez
Date Posted: 09 Feb 2021 at 10:05pm
|
Does this match what your thinking 
|
Posted By: Mikez
Date Posted: 13 Feb 2021 at 8:22pm
| hi Paul does that match what you were thinking. Thanks |