Farm Equipment - 7050 pto shims?

Print Page | Close Window

7050 pto shims?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=178152
Printed Date: 29 Aug 2025 at 7:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7050 pto shims?

Posted By: DIESEL
Subject: 7050 pto shims?
Date Posted: 06 Feb 2021 at 2:57pm

I replaced the pto in my 7050, new races and bearings internally. I didn't replace the metal shims between the cover and the tractor. Was I supposed too, and if so why? Thanks guys!

Replies:

Posted By: DrAllis
Date Posted: 06 Feb 2021 at 4:07pm

99% of the time, the original shim stack will be alright. Bearings shouldn't have had any endplay and not been preloaded to any serious extent.

Posted By: DIESEL
Date Posted: 06 Feb 2021 at 4:52pm

Thanks Doc! Forgive my ignorance here as this is the first time I've done one of these and I'm by no means a mechanic. Once I get the cover thght and there isn't any play foreword or backward I assume that the shims are good?

Posted By: DrAllis
Date Posted: 06 Feb 2021 at 5:55pm

They could be too tight !!! Slowly snug up the bolts knowing there is endplay and watch the endplay disappear. A vice grips on the PTO shaft should be easily able to turn the shaft, allowing for the drag of the clutch discs up above. That's the part that is hard to explain. It will take at least one full revolution of the PTO shaft to seat the rollers in the bearings to determine if it is too tight or not.

Posted By: DIESEL
Date Posted: 06 Feb 2021 at 7:17pm

I have the bolts snug and I can turn the pto by hand. There is no horizontal play in the pto.

Posted By: DrAllis
Date Posted: 06 Feb 2021 at 7:31pm

So, then you are maybe good. Finish tightening the bolts and turn the shaft at least one full revolution.

Posted By: DIESEL
Date Posted: 06 Feb 2021 at 9:00pm

Thanks Doc, as always I appreciate you're knowledge!