D10/D12 Traction Booster Gauge
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=178012
Printed Date: 07 Apr 2026 at 6:54am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D10/D12 Traction Booster Gauge
Posted By: jollymon68
Subject: D10/D12 Traction Booster Gauge
Date Posted: 01 Feb 2021 at 9:09am
|
Trying to find out if one of my D12's was suppose to have a traction booster gauge or not. I have a D10 serial# 9234 and another D12 serial# 5789 and they all have one. The D12 serial# 10027 does not and cannot see if it ever had one. All three tractors have a factory 3pt. hitch. How can I tell if this one is missing or never had one. Thanks
|
Replies:
Posted By: Charlie175
Date Posted: 01 Feb 2021 at 9:15am
|
Does the Gauge Panel hole have a blank over it? Or another gauge is there? By then I'd imagine they all came with one. All "D" series I have seen had one. ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: JoeM(GA)
Date Posted: 01 Feb 2021 at 3:18pm
Looking at the online parts, the first ones didn’t have them, then went through two changes if you look at the serial number breaks in the right column ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: Matt Tallant
Date Posted: 01 Feb 2021 at 3:21pm
| Our D-10 has it serial 3950 |
Posted By: jollymon68
Date Posted: 01 Feb 2021 at 9:12pm
| No blank there but this D12 dash has been apart a few times.Figure ill just put one in that doesn't function. None of the gauges are original, but it does have the tach and it works. The wiring was so jacked up i replaced it with aone wire harness, new plugs, cap, rotor, coil, new gauges, and coil. Now i cant get it to start even with starting fluid. Got spark and the carb has been rebuilt completely. got me stumped! Been tackling this for hours, time to step away and rethink. |
Posted By: Charlie175
Date Posted: 02 Feb 2021 at 6:50am
|
Check your plug wire order. Sounds like they are out of order maybe? 1243 is right ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |