Print Page | Close Window

Deutz Allis 6250: PTO shaft issue

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177479
Printed Date: 20 Aug 2025 at 3:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Deutz Allis 6250: PTO shaft issue
Posted By: air_con
Subject: Deutz Allis 6250: PTO shaft issue
Date Posted: 12 Jan 2021 at 1:38pm
I hope this forum is the right place for this tractor. I have a Deutz Allis 6250, the PTO shaft was ripped out after the draw bar pin fell out and the weight of the bush hog pulled out the shaft. I need to get inside to replace the shaft (I need to have it machined) and to get out any bits of metal that might be in there.

Has anyone ever pulled this part of their tractor apart? I have the service manual and pulled all the bolts and other parts, but I can't get the cover (don't have the manual in front of me) that sits over the PTO transmission; it's the part that also has the hydraulic arms for the three point system.

That, or does anyone know of someone knowledgeable in this tractor? Thanks so much, I can post photos if needed.



Replies:
Posted By: Alvin M
Date Posted: 12 Jan 2021 at 3:34pm
I have but not for awhile I think there are 8 bolts


Posted By: garden_guy
Date Posted: 13 Jan 2021 at 9:07am
Can you post a couple pictures of the damage and the part that won't come off?


Posted By: BigGuy1000
Date Posted: 13 Jan 2021 at 11:18am
I sent you a PM!



Posted By: HudCo
Date Posted: 14 Jan 2021 at 4:08pm
earl hoover in pennsylvaia  570 966 3561  will have parts and knowlage and is a great guy to do bissnes with 



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net