CONVERTING 500 LOADER TO QUICK DETATCH BUCKET
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177065
Printed Date: 19 Jul 2025 at 7:18pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CONVERTING 500 LOADER TO QUICK DETATCH BUCKET
Posted By: SIMPLICITY
Subject: CONVERTING 500 LOADER TO QUICK DETATCH BUCKET
Date Posted: 26 Dec 2020 at 7:17am
|
HELLO WONDERING HOW BIG OF AN ISSUE IT IS / WOULD BE CONVERTING A 500 LOADER OVER TO A QUICK DETATCH BUCKET SET UP.
|
Replies:
Posted By: MACK
Date Posted: 26 Dec 2020 at 8:23am
| All depends on how creative you are. I built one for my TL10. MACK |
Posted By: JimIA
Date Posted: 26 Dec 2020 at 8:32am
|
I know Steve Fischer had some plates built for it a few years ago. I have also sold some Notch brand plates that were blank and the owner welded mounts on to the back of it. These are all skid loader universal plates. When you go to the skid loader plate it opens up a lot of attachments that you can put on your loader. ------------- An open eye is much more observant than an open mouth |
Posted By: Alex09(WI)
Date Posted: 26 Dec 2020 at 11:21am
|
I am currently going through the same process with a 400 series loader. Plan to get the latch boxes and weld cross peices to space the boxes correctly and weld pivot pin hole plate to the back side. ------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY |
Posted By: victoryallis
Date Posted: 26 Dec 2020 at 8:08pm
Does anyone have a link to Fischer’s original post or better yet contact info? ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
JimIA wrote:Posted By: soybreedingboy77
Date Posted: 27 Dec 2020 at 9:24pm
| We got ours for my 460 loader thru the dealership. There is a Shortline bucket company that makes them. Less than $1500 if I remember correctly. My bucket was shot thru so it was cheaper than getting a different bucket. Now I can use all the Skid Steer stuff. |
Posted By: Calvin Schmidt
Date Posted: 28 Dec 2020 at 8:44pm
|
Built my own for a 715B TLB 30 years ago using a forklift plate on the loader. Now have standard bucket, 8' stone fork, bale spear, and forks. Only use the first two now with a telahander in the shed. ------------- Nothing is impossible if it is properly financed |
Posted By: tomNE
Date Posted: 29 Dec 2020 at 12:22pm
|
Just my opinion; make the QT to fit skid steer accessorizes. that way you can buy, borrow or rent any kind of bucket needed! ------------- AC from the start of my families farming career till the end! |
Posted By: Clay
Date Posted: 29 Dec 2020 at 4:36pm
|
Anyone have any blueprints to post on here? I would like to make it rather than buy one ready to go.
|
Posted By: bauerd44
Date Posted: 30 Dec 2020 at 10:40am
|
Here is a link with all kinds of drawings of skid steer attach. https://i.pinimg.com/originals/03/5a/8b/035a8b078121a20a7497988d70ca5603.jpg" rel="nofollow - https://i.pinimg.com/originals/03/5a/8b/035a8b078121a20a7497988d70ca5603.jpg There are lots of drawings on the web. ------------- Missouri Allis-Chalmers Club CA Allis, 175 Allis, 185 Allis |
Posted By: Dirt Farmer
Date Posted: 30 Dec 2020 at 11:48am
| Contact the folks at Worksaver in Litchfield Illinois, they make ready to go adapters and many attachments for loaders and skidsteers of most makes. Made in USA and they ship globally. Goto their website or call them at (217)324-5973. I have gotten several items from them over the years. |
Posted By: JimIA
Date Posted: 31 Dec 2020 at 10:29am
|
I cant find Steve's info at this time. If you can Google Notch MFG Inc you can see their attachment plate. Jim ------------- An open eye is much more observant than an open mouth |
Posted By: steve(ill)
Date Posted: 31 Dec 2020 at 12:55pm
|
all kind of Bobcat plates on e- bay.... i bought a couple to install forks and bush hog on a Bobcat.  ------------- Like them all, but love the "B"s. |