Farm Equipment - wierd light issue/7060

Print Page | Close Window

wierd light issue/7060

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=176911
Printed Date: 26 Jun 2025 at 7:15pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wierd light issue/7060

Posted By: darrel in ND
Subject: wierd light issue/7060
Date Posted: 19 Dec 2020 at 6:29pm

We put LED's on my 7060 today, and had a strange issue. The two head lights on the front of the cab that come on when you turn the switch to "head lights", used to always stay on when you turned the switch to "flood lights" also. But now that we changed em all out (stadium lights, too) to LED's, the two head lights go out when we turn the switch to the "flood light" position. Stadiums come on yet like they are supposed to, with the toggle switch up above. Anyone know why the two headlights would have decided to quit working in flood light position.. ? Thanks, Darrel

Replies:

Posted By: jaybmiller
Date Posted: 19 Dec 2020 at 6:42pm

maybe they're working correctly now ? without seeing a wiring diagram and switch 'table'..

I'd expect only flood lights to come on when flood light switch on, heads only on when heads selected..

I'm sure other 7060 owners will reply soon enough.

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: LB0442
Date Posted: 19 Dec 2020 at 6:47pm

Those lights on the front of the cab are wired for a high and a low beam. They have 2 wires on them (pink and blue I think) and they ground through the frame. If your led is not setup for high/low you can connect both those wires to the positive side. I can post a wiring diagram later if needed.

Posted By: LB0442
Date Posted: 19 Dec 2020 at 6:50pm

https://www.allischalmers.com/forum/allis-7060-wiring-diagram-schematic_topic139284.html" rel="nofollow - https://www.allischalmers.com/forum/allis-7060-wiring-diagram-schematic_topic139284.html

Well I just did a interweb search and a wiring diagram has already been posted.

Posted By: Lonn
Date Posted: 19 Dec 2020 at 9:10pm

You need the high beam/low beam led lights for those two lights.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: darrel in ND
Date Posted: 20 Dec 2020 at 8:56am

thanks, y'all! Darrel