repro 7000/8000 Fuel temp gauge
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=176846
Printed Date: 27 Jul 2025 at 8:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: repro 7000/8000 Fuel temp gauge
Posted By: LB0442
Subject: repro 7000/8000 Fuel temp gauge
Date Posted: 17 Dec 2020 at 12:25pm
|
I just bought 2 of the new reproduction fuel gauges. Thought I would post what I notice. It is a steel case versus the new AGCO is plastic. All of the studs on the back are tight. The printing and colors on the front are excellent, very clear. Overall looks to be good. Of course only time will tell how the internals will stand up but I definitely like the original look better. It looks like they took the time to build a good looking unit. This is where I bought mine. https://www.ebay.com/itm/Allis-Chalmers-Cluster-Gauge-Fuel-Water-Temperature-7000-8070-4W220-4W305/114463144725?hash=item1aa688fb15:g:IhIAAOSw2LBfh18R" rel="nofollow - https://www.ebay.com/itm/Allis-Chalmers-Cluster-Gauge-Fuel-Water-Temperature-7000-8070-4W220-4W305/114463144725?hash=item1aa688fb15:g:IhIAAOSw2LBfh18R This is what it looks like in a new dash panel(going in the 7580 someday). It does come with the hold down on the back, just took it off for picture.   It does come with this sheet which is good info for ohms readings.  |
Replies:
Posted By: Lonn
Date Posted: 17 Dec 2020 at 4:31pm
|
Where is it made ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: LB0442
Date Posted: 17 Dec 2020 at 5:54pm
| Well I looked them over and nothing on the box and nothing on the gauge. Country of origin is unknown at this time. |
Posted By: Red Bank
Date Posted: 17 Dec 2020 at 10:12pm
| Looks nice where did you get the new panel? |
Posted By: LB0442
Date Posted: 18 Dec 2020 at 9:54am
| I bought several of those plastic dashes from AGCO years ago. This is the last one I have to install. Seems like there is just not enough hours to do the things I want to do and then I get distracted on another project. |
Posted By: LeonR2013
Date Posted: 18 Dec 2020 at 3:05pm
|
I got old. Leon |