Print Page | Close Window

What model AC mower is this?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=176434
Printed Date: 20 Oct 2025 at 3:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: What model AC mower is this?
Posted By: AC720Man
Subject: What model AC mower is this?
Date Posted: 02 Dec 2020 at 5:02pm



A friend of mine just bought a nice CA tractor with a 2 bottom plow, rear snap coupler sickle mower, and a snap coupler blade. Trying to find out the model number of the mower. Need a few parts for it.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD



Replies:
Posted By: Kenny L.
Date Posted: 02 Dec 2020 at 5:22pm
I think it's a number 7 mower


Posted By: DiyDave
Date Posted: 02 Dec 2020 at 6:15pm
No pitman, so I'd say #7, too!Wink

-------------
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!


Posted By: AC720Man
Date Posted: 02 Dec 2020 at 6:27pm
Yes no pitman. It has a gear box similar to my 82S.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: AC720Man
Date Posted: 02 Dec 2020 at 6:38pm
Both lift arms have a plate, I’m sorry I don't know the proper name. So the pins lay in the coupler and then a pin slides through 2 holes that lock it to lift arm. The 2 arms on each plate are broken. Looks like cast to me. Would like to find those from a donor mower.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: AC720Man
Date Posted: 02 Dec 2020 at 7:19pm

Went to the AGCO site and found it. It’s called a lift arm bracket. Thanks for helping me with the model number.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: Mikez
Date Posted: 02 Dec 2020 at 7:37pm
804116. Says we have them


Posted By: AC720Man
Date Posted: 03 Dec 2020 at 8:56pm
What’s the price on them Mike?

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: Mikez
Date Posted: 03 Dec 2020 at 9:54pm
I'll take a look. How many you need


Posted By: AC720Man
Date Posted: 04 Dec 2020 at 7:07am
2

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: LaJaMe
Date Posted: 06 Dec 2020 at 11:38pm
80R  ???


Posted By: Mikez
Date Posted: 07 Dec 2020 at 12:30pm
Hi guys.
The #14 is to fit D17. Robbie says he needs on for CA, and they show two. The #17 803835 says used prior to SR no. 6601. And 803963 is used on SR no. 6601& up.
I don't know if Robbie has his SR no. But is there any other way he can tell what one he has.
Thanks


Posted By: im4racin
Date Posted: 07 Dec 2020 at 6:35pm
The width of the 2 up legs. The ca needs to be wider to fit the stamped lift arms. I can measure mine if needed



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net