WD45 Hydraulic leak
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=175849
Printed Date: 04 Sep 2025 at 11:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD45 Hydraulic leak
Posted By: twinsonfarm
Subject: WD45 Hydraulic leak
Date Posted: 09 Nov 2020 at 3:24pm
|
I have attached a photo of my WD45 Hydraulic leak. It appears to drip from the valve at the rear (where the arrows are pointing. down onto the pump itself. Is there a seal kit parts number for this? http://link.shutterfly.com/yZvkYjoChbb" rel="nofollow - http://link.shutterfly.com/yZvkYjoChbb |
Replies:
Posted By: MACK
Date Posted: 09 Nov 2020 at 8:58pm
| There is a oring and packing on both sides. Screw in front of valve has to come out to remove shaft. MACK |
Posted By: twinsonfarm
Date Posted: 09 Nov 2020 at 8:59pm
| Thank you. |
Posted By: Lon(MN)
Date Posted: 10 Nov 2020 at 6:50am
| The detent ball will fall out and bounce a couple times then disappear, so get ready. |
Posted By: Dave(inMA)
Date Posted: 10 Nov 2020 at 8:07am
|
Lon's comment is a good reason to work on these assemblies inside a box so the little bits have a harder (note that I didn't say "impossible") time escaping! ------------- WC, CA, D14, WD45 |
Posted By: twinsonfarm
Date Posted: 10 Nov 2020 at 8:17am
|
Thank you guys. Parts ordered from Agco. |
Posted By: Aaron123
Date Posted: 10 Nov 2020 at 2:41pm
|
I rebuilt my hydraulic valve on my 1954 WD45 and I got all the stuff at sandy lake implements here is there web site sandylakeimp.com I had my wd45 parts cataloge and they had the same thing and we talked through What I meeded.. they where the only ones I found that knew what I needed |