allis 400 loader value
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=175500
Printed Date: 15 Dec 2025 at 6:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: allis 400 loader value
Posted By: mike 44
Subject: allis 400 loader value
Date Posted: 27 Oct 2020 at 4:16am
|
Replies:
Posted By: mike 44
Date Posted: 27 Oct 2020 at 4:18am
| im looking at this loader could you tell me what I should spend.. it does not have the pump... has everything else I think... also will it fit a d15? or d17 thanks |
Posted By: Kenny L.
Date Posted: 27 Oct 2020 at 5:15am
|
Mike, I paid 450.00 for one this year and it had a pump, I mounted it on a wd45 and think it would work on a D-15 but not on a D-17 without changing the mounting brackets that goes to the rear axles (need to be longer) But I'm by far no expert. |
Posted By: WF owner
Date Posted: 27 Oct 2020 at 6:38am
| Personally, I wouldn't be interested in it for a D-17 (unless it was a Series 4) without a front mount pump. |
Posted By: allisbred
Date Posted: 27 Oct 2020 at 7:45am
| I needed a loader for the 175 about 5 plus years ago. I bought a TS 500 that was supposed to be off a D17, this was too small, paid 500$, then I bought a New Idea loader (think it was a 504?) for about the same $$. The NI loader would not clear my wide front correctly. After much driving around looking at loaders of all sorts, most were broke up and missing parts like brackets, cylinders, valves ect.... I then ran across a complete AC400 loader for I believe about 1200$. The AC 400 loader is now on the 175 and I am happy that I went that route. I sold the other loaders for what I paid to a junk dealer near me so I wasn’t off that far. Just my 2 cents worth. |
Posted By: DrAllis
Date Posted: 27 Oct 2020 at 8:00am
| Need more pics. That isn't s 400 or 500 ldr to fit a D-17. I'm wondering if it fits a 5040/5050 ?? axle tubes are separate from the towers...….. |
Posted By: allisbred
Date Posted: 27 Oct 2020 at 8:40am
|
DrAllis wrote:Posted By: mike 44
Date Posted: 29 Oct 2020 at 1:23am
| thanks I quit bidding at 450.00 its over 500 now with 4 days to go |