Print Page | Close Window

19/32 Socket

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=175141
Printed Date: 17 Dec 2025 at 3:23pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 19/32 Socket
Posted By: Gatz in NE
Subject: 19/32 Socket
Date Posted: 13 Oct 2020 at 11:33am
IIRC, a 1/2" drive 19/32 socket that came with a Craftsman set......
About the only use I'd ever seen for that size; was on the support block inside the right rail for the steering shaft of a WD/WD45.

Anyone confirm that?



Replies:
Posted By: Joe(TX)
Date Posted: 13 Oct 2020 at 12:24pm
Basically a 15mm socket

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A


Posted By: Gary Burnett
Date Posted: 13 Oct 2020 at 12:33pm
Some AC equipment used both 19/32 and 25/32,I have wrenches and sockets we used.


Posted By: Dakota Dave
Date Posted: 13 Oct 2020 at 2:04pm
I've never used the 19/32 or the 25/32. And once on of the 8 point sockets that came in my chraftsman set back in the 70's but they were part of the complete set. The newer sets don't have them. We did use some of the oddball sizes working on jet engines when I was in the military. Also used 12 point specific sockets for military spec hardware. Seems to me wheel assembly bolts for a B52 were 19/32 12 point. I took all those unused sockets out of the farm tool sets and put in a seperate box behind the tool board. Have only had to take that box out twice in ten years. But they are there if needed.


Posted By: ACinSC
Date Posted: 13 Oct 2020 at 2:27pm
Something on my D 15 rear wheel takes a 25/32 . I tried Napa but had no luck getting one . Gave up not long after . Thinking you can get one online like everything else . Thanks


Posted By: bradley6874
Date Posted: 13 Oct 2020 at 4:45pm
Old chevy trucks used them

-------------
You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul


Posted By: Gary
Date Posted: 13 Oct 2020 at 4:57pm

25 / 32" would be very close ( if not dead on) to a 23 MM.


Posted By: ACinSC
Date Posted: 13 Oct 2020 at 7:07pm
Sounds right Gary , couldn't find one of them either . I wanted to get one and make sure it fit . I'm kinda cheap but I've moved on anyway . Thanks


Posted By: bigal121892
Date Posted: 13 Oct 2020 at 7:09pm
(25/32)*25.4=19.83mm


Posted By: WF owner
Date Posted: 13 Oct 2020 at 8:36pm
25/32 
https://www.amazon.com/Genius-Tools-483825-Hand-Socket/dp/B07DCZT4M1/ref=sr_1_6?crid=1FLA34WW4WCW4&dchild=1&keywords=25%2F32+socket&qid=1602639281&sprefix=25%2F32%2Caps%2C176&sr=8-6" rel="nofollow - https://www.amazon.com/Genius-Tools-483825-Hand-Socket/dp/B07DCZT4M1/ref=sr_1_6?crid=1FLA34WW4WCW4&dchild=1&keywords=25%2F32+socket&qid=1602639281&sprefix=25%2F32%2Caps%2C176&sr=8-6

19/32
https://www.amazon.com/Genius-Tools-483819-Hand-Socket/dp/B07DCZSMXY/ref=sr_1_1?dchild=1&keywords=19%2F32+socket&qid=1602639356&sr=8-1" rel="nofollow - https://www.amazon.com/Genius-Tools-483819-Hand-Socket/dp/B07DCZSMXY/ref=sr_1_1?dchild=1&keywords=19%2F32+socket&qid=1602639356&sr=8-1


Posted By: ACinSC
Date Posted: 14 Oct 2020 at 6:57am
Thanks Curt ! May just order one and I'll have it .


Posted By: jaybmiller
Date Posted: 14 Oct 2020 at 8:46am
https://www.grainger.com/product/PROTO-25-32-in-Alloy-Steel-Socket-1AM71" rel="nofollow - https://www.grainger.com/product/PROTO-25-32-in-Alloy-Steel-Socket-1AM71
about $11, up here $65 on amazon.ca !!!


-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water


Posted By: Ed (Ont)
Date Posted: 14 Oct 2020 at 1:54pm
Back in the day these oddball sockets were included in the set. My dad had a set of husky sockets that had some that don’t seem to be as readily available now. But that was 60 years ago!! I wish I had them. 


Posted By: FREEDGUY
Date Posted: 14 Oct 2020 at 5:33pm
A google search shows Home Depot has/can get them Wink


Posted By: ACinSC
Date Posted: 14 Oct 2020 at 8:39pm
Yeah Jeff I saw that too , but I dunno . Manager at Napa could not even order one . I'll order one from Amazon . Thanks


Posted By: Gary Burnett
Date Posted: 15 Oct 2020 at 4:42am
Originally posted by Ed (Ont) Ed (Ont) wrote:

Back in the day these oddball sockets were included in the set. My dad had a set of husky sockets that had some that don’t seem to be as readily available now. But that was 60 years ago!! I wish I had them. 


I've bought several sets of old sockets that had the old sizes in them,think one had a
31/32  in it.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net