D19 gas motor to D17 diesel
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174937
Printed Date: 14 May 2024 at 7:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D19 gas motor to D17 diesel
Posted By: HD6GTOM
Subject: D19 gas motor to D17 diesel
Date Posted: 04 Oct 2020 at 8:22pm
| Is it a simple job to put a D19 gas into a series 4 that had a bad motor. Sorry if its been asked before. Old guy has a D19 with bad rear end or tranny he doesn't know which. Good motor. Will it bolt into his D17? They are both complete units. D17 tossed a rod thru the block got into the water jacket. I get to look at it next week if he feels good. |
Replies:
Posted By: DiyDave
Date Posted: 04 Oct 2020 at 9:05pm
It has been done, but the sheet metal won't fit, IIRR. I don't envy you in this job...  ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
HD6GTOM wrote:Posted By: HD6GTOM
Date Posted: 05 Oct 2020 at 10:07am
| Ok, probably pass on it. Thanks |
Posted By: desertjoe
Date Posted: 06 Oct 2020 at 1:51am
|
Hey Tom,,,where is your adventurous spirit,,,? You do have a cuttin torch and a welder don't you,,,? Just think how much your neighbor will love you for bailing him out,,,,,,,,
|
Posted By: SteveM C/IL
Date Posted: 06 Oct 2020 at 9:47pm
| Your title says 17 diesel...of so I don't see the challenge. Gasser would be different story. |
Posted By: HD6GTOM
Date Posted: 06 Oct 2020 at 10:41pm
| Wondering about it. I know my Diesel 17 was longer than the gas units. Was hoping it would be a simple bolt up. The D19 tin is good, rad is good. Could all tin be switched,? |
Posted By: SteveM C/IL
Date Posted: 07 Oct 2020 at 11:44am
|
I'm thinking direct bolt in. May have to use clutch and flywheel from 17 but it should bolt to crank ok. PM the Dr. He will know. The engines are same physical dementions. 19 is wider I think so tin will not swap. |
Posted By: Gary in da UP
Date Posted: 08 Oct 2020 at 1:44pm
| I repowered a wc with a 262 gas 6 cyl needs little to be considered done will be an awesome puller or tractor rider for sale due to health reasons send pm for more info |