WD shifter bushings
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174244
Printed Date: 08 Oct 2025 at 7:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD shifter bushings
Posted By: jhendy18
Subject: WD shifter bushings
Date Posted: 09 Sep 2020 at 2:15pm
|
Hey everyone, I am working on a WD and noticed I have 1 shifter bushing that needs replacing in the hand clutch assembly. Does anyone know where I can source one of these?
thanks
|
Replies:
Posted By: Sugarmaker
Date Posted: 09 Sep 2020 at 8:46pm
|
Jhendy18, Welcome! Can you better describe the bushing you need? Lots of parts in there. Regards, Chris
-------------
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
Posted By: MACK
Date Posted: 09 Sep 2020 at 8:50pm
|
They never had a bushing, but you can replace the pin, bore lever and install a bushing. McMaster-Car would have a bushing. MACK
|
Posted By: jhendy18
Date Posted: 09 Sep 2020 at 9:04pm
Hey Chris,
They are inside of the clutch shifter assembly, where it slides over the transmission shaft. I attempted to upload a picture here let me know if you can see it, if not I'll try to upload one from a computer tomorrow. uploads/21335/20200909_210033_2020-09-09_21-02-57.jpg" rel="nofollow - 20200909_210033_2020-09-09_21-02-57.jpg
|
Posted By: jhendy18
Date Posted: 09 Sep 2020 at 9:23pm
|
uploads/21335/20200909_212216.jpg" rel="nofollow - 20200909_212216.jpg
|
Posted By: jhendy18
Date Posted: 09 Sep 2020 at 9:24pm
|
Item #4 in the parts diagram I posted
|
Posted By: Sugarmaker
Date Posted: 09 Sep 2020 at 9:35pm
|
Ok I see the bushings but for the life of me I do not remember checking mine for wear or replacement? Call Sandy Lake or one of the other suppliers that sponsors this site. Regards, Chris
-------------
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
Posted By: Gary
Date Posted: 10 Sep 2020 at 4:58am
Now Mack, be careful.
See the posted picture for the 'wanted' bushings.
Bottom left corner, 2 bushings in Hand Lever, P/N 224705.
Item 1 on page 222
G
|
Posted By: Lon(MN)
Date Posted: 10 Sep 2020 at 7:47am
|
I have lots of used hand clutch parts on the shelf if you think that would work for you.
|
Posted By: jhendy18
Date Posted: 10 Sep 2020 at 7:51am
|
Thanks for leads everyone! I called sandy lake and the part is no longer made, however according to the parts book if you order the shifter assy these bushings should be included in it. I ended up buying a used shifter assembly off of ebay for half the price that has at least 1 good bushing which is all I need.
|
|