Allis sickle bar mower value?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174121
Printed Date: 19 Jul 2025 at 7:39am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis sickle bar mower value?
Posted By: GeneD14
Subject: Allis sickle bar mower value?
Date Posted: 05 Sep 2020 at 3:43pm
|
I have an old sickle bar mower that sat in the barn unused for over 40 years. I had one new tire and one bald tire. What is it worth?   |
Replies:
Posted By: Kenny L.
Date Posted: 05 Sep 2020 at 4:01pm
| I watch a 80t and a 82t sell Aug. 26, the 80t sold for 400.00 and the 82t sold for 450.00. I think your is a 82t. The one thing that makes a different is how the cross arm is. HTH |
Posted By: GeneD14
Date Posted: 05 Sep 2020 at 4:27pm
| Thanks for the reply! |
Posted By: john(MI)
Date Posted: 06 Sep 2020 at 2:22pm
|
That is an 80T the axle on the 82 is angled from side to side. If it's complete and working I would think you could get $400. I can't see if it has a belt on it so that may lower the price. They are expensive!
------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: GeneD14
Date Posted: 06 Sep 2020 at 2:36pm
| John, thanks for your advice! |
Posted By: Gary Burnett
Date Posted: 06 Sep 2020 at 5:02pm
Just get a 'C' belt the right length works better than the originals if the pulleys are worn some.C104 fits those as well as I can remember.
|
john(MI) wrote:Posted By: im4racin
Date Posted: 06 Sep 2020 at 9:45pm
| Without a doubt that mower in the picture is an 82t. We have bought a few in the last year and none have been over $300 for a useable machine and one had a 9' bar |
Posted By: AC720Man
Date Posted: 06 Sep 2020 at 9:55pm
|
A lot determines value. Is it ready to use? Does it need sections? Guards? I bought a nice 82S, replaced all sections because I wanted to update it. 2 new belts, and before I knew it I had over $700 total in it. Was it worth it? Absolutely, it’s a great mower. Matches up with my AC conditioner behind it. I hit the jack pot for something I had been looking for for a long time. I’ve never run a trail mower before but it looks to be in good shape. Just need some more info to give an opinion on value. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: steve(ill)
Date Posted: 06 Sep 2020 at 10:11pm
This is an 80T... with the curved front ------------- Like them all, but love the "B"s. |