Farm Equipment - AC rear mount mower

Print Page | Close Window

AC rear mount mower

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=173987
Printed Date: 07 Apr 2026 at 7:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: AC rear mount mower

Posted By: D14JIM14
Subject: AC rear mount mower
Date Posted: 31 Aug 2020 at 6:34pm

I need the sickle sections and rivets for a 7ft AC mower . Who carries them and where can I get guards for it . It mounts on a D17IV .
Thanks Jim

Replies:

Posted By: AaronSEIA
Date Posted: 31 Aug 2020 at 6:57pm

Any farm store will carry sections and guards. I'd switch to bolted sections. Much easier to deal with.

AaronSEIA

Posted By: john(MI)
Date Posted: 31 Aug 2020 at 6:58pm

Unless you are a purist, use the nuts and bolts designed for that purpose now. The last sickle sections and nuts and bolts I bought were from TSC. I took one section in with me to match up. At that time they had two types.

-------------
D14, D17, 5020, 612H, CASE 446

Posted By: D14JIM14
Date Posted: 31 Aug 2020 at 7:03pm

Thanks !!

Posted By: Gary Burnett
Date Posted: 31 Aug 2020 at 7:29pm

Ford are the same and some JD haybine sections

Posted By: D14JIM14
Date Posted: 31 Aug 2020 at 7:38pm

Thanks again !

Posted By: D14JIM14
Date Posted: 01 Sep 2020 at 5:28pm

Got them and bolts at TSC IN Terre Haute, In .

THANKS AGAIN

Posted By: AC720Man
Date Posted: 01 Sep 2020 at 6:49pm

Ditto on the nuts and bolts. I replaced all my sections on my 82S this spring. Hershel sections which TSC carries as well as the entire kit for a 7’ mower.
I by mine through P Bradley and sons. Either place carries them.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD