AC 904 Mower/Conditioner
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=173801
Printed Date: 22 Aug 2025 at 1:46am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC 904 Mower/Conditioner
Posted By: thompson.idaho
Subject: AC 904 Mower/Conditioner
Date Posted: 24 Aug 2020 at 6:04pm
Finally broke the shaft on my wobble box yoke, and have been unable to find another. John Deere makes a near replica in their AE38050 or AE57735, but slightly too large for my box. Any suggestions on where to find one, or what other machines may have used a yoke this size? Too expensive to weld, and probably won't hold anyway.
|
Replies:
Posted By: AC720Man
Date Posted: 24 Aug 2020 at 8:28pm
Pretty sure the forage choppers used that gear box also. Have you went on the Agco visitor webpage to see if they still carry it? A good machine shop can make a new shaft. Parts are becoming hard to get for sure. Our 390 kept breaking the mounting bolts holding the wobble box. My brother placed a thin rubber washer between the wobble box and the mounting bracket. Solved the breaking bolts issue. Vibration is the cause.
------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: AllisFreak MN
Date Posted: 25 Aug 2020 at 7:11pm
My bro had a 390 and somebody before him fabbed a green one off of a John Deere 800 swather on there, it seemed to work fine for him.
------------- '49 A-C WD, '51 A-C WD, '63 A-C D17 Series III, 1968 A-C One-Seventy, '82 A-C 6060, '75 A-C 7040, A-C #3 sickle mower, 2 A-C 701 wagons, '78 Gleaner M2
|
|