Farm Equipment - D19 LIFT CYLINDER QUESTION

Print Page | Close Window

D19 LIFT CYLINDER QUESTION

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=173768
Printed Date: 09 Apr 2026 at 3:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D19 LIFT CYLINDER QUESTION

Posted By: CORY
Subject: D19 LIFT CYLINDER QUESTION
Date Posted: 23 Aug 2020 at 6:24pm

Saw a D19 today and was looking at the lift cylinders for the snap coupler arms. What is odd is the cylinder rod that is on the left side as sitting on the seat is about half the bore diameter of the right side. The D19 that I have has the same diameter bore on both sides. Both cylinders looked to be original to the tractor but seemed odd that one would be half diameter of the other

Replies:

Posted By: DrAllis
Date Posted: 23 Aug 2020 at 6:37pm

The model D-19 only came with the larger diameter rod, according to AGCOPARTS.com. I doubt very much that it came out of the factory with mismatched cylinders. There wasn't another A-C tractor at the time that D-19 was built that even had the smaller diameter rod, so it was changed out sometime in the last 60 years.