706-G forklift
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=173544
Printed Date: 15 May 2024 at 7:07am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 706-G forklift
Posted By: Postville
Subject: 706-G forklift
Date Posted: 14 Aug 2020 at 6:09pm
|
I have a 706-G forklift that jumps when shuttle shifting. It also creeps. I have the idle down to 600 rpms. It is hard to come into a pallet. If I use the clutch there is no feathering, machine still lurchs. Oil level good, oil looks a little milky. Using red hydraulic fluid, ATF. How can I adjust the torque converter to stop this? I would think the machine should remain stationary until engine revs up. Any tips? Thanks, Bob
|
Replies:
Posted By: DiyDave
Date Posted: 14 Aug 2020 at 6:26pm
|
First thing to do is change that milky oil. water in oil makes it grabby...
Oh, and welcome to the forum, others with more knowledge of this model will be along...  ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Postville
Date Posted: 15 Aug 2020 at 6:43pm
|
I changed the oil today. Machine is better but still lurches some when shuttle shifting, better in that it will stay stationary with a lot less brake pressure.I hope it will continue to improve. I have a Hyster with a similar Alison transmission. This machine just sits there when you shift and moves when revving up the engine. Should the AC be similar? I can't figure out how water gets into that case, is this from condensation? Thanks for the tip. Hard to get an answer from a dealer. Bob
|
Posted By: Coke-in-MN
Date Posted: 16 Aug 2020 at 10:50am
|
Herc-U-Lift in Mpls sold those machines - old mechanics there knew them - unsure of present group - might try their service dept for more info . ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |