WD Hydraulic line
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=173105
Printed Date: 28 Aug 2025 at 3:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD Hydraulic line
Posted By: Gary (sw Wis.)
Subject: WD Hydraulic line
Date Posted: 26 Jul 2020 at 9:50am
|
I'm looking for the WD hydraulic line that go to the back remote. Do they still make them? Anybody know part #? Thanks ------------- 190XT - D17 - D14 - WD45 w/loader - WD - (2)B110 - 616H - 610 - B-208 - WD with 190 Mounted Corn Picker - All Crop 60 |
Replies:
Posted By: ac45dave
Date Posted: 26 Jul 2020 at 9:56am
|
Part # in agco book 70223362 ------------- 54 wd-45gas ; 56 wd-45d N/F w/fact p/s ; 63 d-17 sIII N/F gas ; 60 D14 N/F ; 67 d-17 sIV N/F gas ; 63D15 sII W/F; 39rc#667 ; 2021 massey 4710 fwa ; gravely 2 wheel tractors |
Posted By: NICKMI
Date Posted: 26 Jul 2020 at 10:21am
| I think you’d be better off going and finding one off a junker or to a salvage yard Maybe somebody on the forum who’s close to your location has one they’d sell |
Posted By: orangereborn
Date Posted: 26 Jul 2020 at 2:39pm
 This is it....I think I posted this a while back but in case it does not show up...Thanks....Dale |
Posted By: SteveM C/IL
Date Posted: 26 Jul 2020 at 10:59pm
| You could make a hydraulic hose work but the pipe fits better |
Posted By: Dakota Dave
Date Posted: 26 Jul 2020 at 11:27pm
| I got one off EBay it wasn't to bad. My other tractor has a hose with coupler bolted to the bottom corner of the foot step. The hose routed under the tractor is almost invisible and works just as good as the original. |
Posted By: Lon(MN)
Date Posted: 27 Jul 2020 at 5:51am
| I have one for sale. Located in Elk River MN lselkriver@gmail.com |
Posted By: IBWD MIke
Date Posted: 27 Jul 2020 at 7:57am
|
One of the parts machines I drug home the previous owner had fashioned one out of copper tubing! Yes, it had a nice ventilation in it. some of the 'Repairs' I find on these things just blow my mind! |
Posted By: only AC orange
Date Posted: 27 Jul 2020 at 12:43pm
| Anybody have the fitting to attach the above pictured line to valve body? |
Posted By: orangereborn
Date Posted: 27 Jul 2020 at 1:47pm
|
Gary (sw Wis.) wrote:Posted By: orangereborn
Date Posted: 27 Jul 2020 at 1:53pm
|
Posted By: Gary (sw Wis.)
Date Posted: 28 Jul 2020 at 1:08pm
|
Thank everyone. My brother found one in a junk yard for me. ------------- 190XT - D17 - D14 - WD45 w/loader - WD - (2)B110 - 616H - 610 - B-208 - WD with 190 Mounted Corn Picker - All Crop 60 |
Posted By: CTuckerNWIL
Date Posted: 29 Jul 2020 at 6:17pm
 I saw a picture last night on facebook, of a WD or 45 with a brass ball valve in line to a 2 way hydraulic valve. That valve was rated at 600 PSI The one good thing, may be that the 2 way valve had a 2000 psi relief valve in it?????????------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: IBWD MIke
Date Posted: 30 Jul 2020 at 7:42am
It amazes me what you see in hydraulic systems! It's like people have no concept of pressure ratings. How much schedule 40 black iron pipe do you see on tractors rated for 2000+ PSI? At work we run schedule 80 for anything over 120 PSI, (air).
|