Farm Equipment - D17 hydraulics

Print Page | Close Window

D17 hydraulics

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=172333
Printed Date: 20 Oct 2025 at 11:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 hydraulics

Posted By: Rick1263
Subject: D17 hydraulics
Date Posted: 25 Jun 2020 at 5:52pm

I only have one hydraulic port on the back of my d17 looking to make hay using a haybine and square baler I need two hydraulic hookups for each of those units I only have one how will this work?

Replies:

Posted By: Joe(TX)
Date Posted: 25 Jun 2020 at 6:21pm

If they are single acting cylinders, use a selector valve to switch between the cylinders.

Adding a double valve is also an option. The operators manual shows each setup.

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A

Posted By: DSeries4
Date Posted: 25 Jun 2020 at 8:48pm

Early D17s (prior to Series 4) only have a high pressure/low volume single acting hydraulic system. Not great for what you are wanting to use it for.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080