Print Page | Close Window

Allis Chalmers B Woods Mower Pully

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=172237
Printed Date: 07 Oct 2025 at 5:36pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Allis Chalmers B Woods Mower Pully
Posted By: rhaley
Subject: Allis Chalmers B Woods Mower Pully
Date Posted: 22 Jun 2020 at 11:55am
I bought a1940 Allis Chalmers B with a Woods Mower, but the pully for the tractor to power the mower is missing - anyone know what the part # is and where to get it?



Replies:
Posted By: Ted J
Date Posted: 22 Jun 2020 at 2:00pm
Send Bill Deppe a PM.
https://www.allischalmers.com/forum/member_profile.asp?PF=659" rel="nofollow - Bill Deppe/AC Salvag
More than likely he has one for you.


-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17


Posted By: Scott B
Date Posted: 22 Jun 2020 at 2:01pm
I've seen theme with two different pulleys. One set up mounts on right hand side to the side PTO shaft. The other set up has a larger pully that connects to the rear PTO shaft. Might want to specify which you're looking for and put a a WTB note in classifieds.

-------------
D17 Series 1
Allis B- 1939
Allis B- 1945


Posted By: Scott B
Date Posted: 22 Jun 2020 at 2:02pm
Originally posted by Scott B Scott B wrote:

I've seen theme with two different pulleys. One set up mounts on right hand side to the side PTO shaft. The other set up has a larger pully that connects to the rear PTO shaft. Might want to specify which you're looking for and put a a WTB note in classifieds.

Sorry, the first setup is a mount on left side of tractor (not the right side)

-------------
D17 Series 1
Allis B- 1939
Allis B- 1945


Posted By: steve(ill)
Date Posted: 22 Jun 2020 at 2:16pm


-------------
Like them all, but love the "B"s.


Posted By: steve(ill)
Date Posted: 22 Jun 2020 at 2:17pm
the pulley on the "LEFT" would use a taper shaft with a key... the rear PTO pulley would fit over the 6 spline shaft ( 1- 1/8 or 1- 3/8 inch)

-------------
Like them all, but love the "B"s.


Posted By: Brian F(IL)
Date Posted: 22 Jun 2020 at 2:34pm
For Woods mowers, B's, C's, and CA's used the left side pulley.  This was originally designed for the flat belt pulley.

WD & WD-45 (and maybe other models) used the pulley mounted on the PTO shaft.

HTH


Posted By: PaulB
Date Posted: 22 Jun 2020 at 2:51pm
The D10/12 mowers used the PTO shaft mounted pulley. Any WOODS dealer can get a new pulley for you. Often a used pulley is cracked. 

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY


Posted By: den/southern illinoi
Date Posted: 22 Jun 2020 at 3:00pm
Sent you a PM.   Den


-------------

Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net