Farm Equipment - reversing spin out rim

Print Page | Close Window

reversing spin out rim

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=172010
Printed Date: 19 Jul 2025 at 11:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: reversing spin out rim

Posted By: KurtDE
Subject: reversing spin out rim
Date Posted: 13 Jun 2020 at 8:17pm

I picked up a new to me D15 II that had one of the new tires mounted backwards, to get it to run the right direction they mounted the whole wheel rim and tire on in reverse! This caused the eccentric locks to be on the inside and not accessible. My question is after taking everything off and pounding out the froze up eccentric bolts can I just remount the wheel center on the other of the rails? I know it will put the valve stem on the inside but I can live with that. the rails look the same from both sides. I'm hoping I don't have to turn the tire on the rim by doing this.

Replies:

Posted By: MACK
Date Posted: 13 Jun 2020 at 9:34pm

Yes. MACK

Posted By: dawntreader74
Date Posted: 13 Jun 2020 at 9:40pm

like mack said they will go each way.