Farm Equipment - Allis 7080 transmission

Print Page | Close Window

Allis 7080 transmission

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=171167
Printed Date: 21 Aug 2025 at 2:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis 7080 transmission

Posted By: orangereborn
Subject: Allis 7080 transmission
Date Posted: 16 May 2020 at 4:35pm

Where is the pressure sensor 4 the PD trans located? 1800 + moving???...thanks Dale

Replies:

Posted By: Michael V (NM)
Date Posted: 16 May 2020 at 5:38pm

On my 7060, its on top of the filter inside the LH frame rail...

Posted By: orangereborn
Date Posted: 16 May 2020 at 7:14pm

Michael V (NM) wrote:

On my 7060, its on top of the filter inside the LH frame rail...

Posted By: orangereborn
Date Posted: 16 May 2020 at 7:31pm

Michael V (NM) wrote:

On my 7060, its on top of the filter inside the LH frame rail...

... I had just looked at the wiring diagram showing engine compartment.so you got me on the right end... looks like the insulation between the radiator and support slid down against The connector so the wire wore through. It is right in the middle in front underneath the support. at least for now I'm thinking positive until I'm proven wrong. Looks like the sensor May be generic.. thanks. Be safe. Dale

Posted By: DrAllis
Date Posted: 16 May 2020 at 7:32pm

Maroon tractors inside the left frame rail. Black tractors under the radiator.