Print Page | Close Window

6080 rear pto seal.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=171164
Printed Date: 12 Aug 2025 at 7:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 6080 rear pto seal.
Posted By: jrjuday
Subject: 6080 rear pto seal.
Date Posted: 16 May 2020 at 2:02pm
Hi, everybody. I have a 6080 that is leaking around the pto shaft. Is it possible to replace the seal without removing the entire pto housing? My service manual does not cover replacing just the seal, only removal and reinstall of the entire housing.



Replies:
Posted By: LB0442
Date Posted: 16 May 2020 at 11:08pm
Yes you have to pull off that rear housing.  Pretty heavy so use a cherry picker.  The long PTO shaft that goes over the top of the ring and pinion will come with it.  Make sure you engage the PTO seasonal lever on the left of the seat before pulling apart.  Here are some manual pages I copied for someone else.










Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net