plow
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170967
Printed Date: 25 Aug 2025 at 1:28am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: plow
Posted By: Dusty MI
Subject: plow
Date Posted: 09 May 2020 at 2:57pm
|
Anyone have or see an Allis 3 point 2-14 mounted plow ? I would like to find one. Dusty
------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Replies:
Posted By: MACK
Date Posted: 09 May 2020 at 9:26pm
| Don't ever remember seeing one but they probably had one. MACK |
Posted By: Tracy Martin TN
Date Posted: 09 May 2020 at 9:34pm
|
They made one. Tracy ------------- No greater gift than healthy grandkids! |
Posted By: ac fleet
Date Posted: 10 May 2020 at 12:59pm
|
I made one out of and old pull 2-14 ac plow ---- sittin out here by the shed. pulled it with the 404-u tractor for several years. ------------- http://machinebuildersnetwork.com/ |
Posted By: Dusty MI
Date Posted: 10 May 2020 at 1:17pm
|
If I find one I'll put it on my D-10 series III. Dusty Would it be at all practical to convert a Snap Coupler one to 3-point ?
------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: TomYaz
Date Posted: 10 May 2020 at 5:28pm
My thought too...werent the 3 pt vs SC frames the same? ------------- If its not an All-Crop, it all crap! |
Dusty MI wrote:Posted By: Tracy Martin TN
Date Posted: 12 May 2020 at 10:37pm
|
Dusty, found a couple of my plow manuals. They made a 3 point in 12,14 and 16 in the 72 and 82 series plows. I have one manual shows the same sizes in the 73 and 83 series. One manual has the 62 and 63 series, 10 and 12 inch,but doesn't show a 3 point, but they may have offered it. HTH Tracy ------------- No greater gift than healthy grandkids! |
Posted By: JoeO(CMO)
Date Posted: 13 May 2020 at 8:21am
|
There was a BM to convert from SC to 3 pt. I have a 2-btm 3pt, items are stored on top of it now to hold it down now, hooked to my D10 III. I used it for my Avatar pic, taken fall 2006 and haven't used since. The present Av pic is from a Advertising Brochure.  Here is another on my D15 II. It would appear that parking is at a premium at the farm!  ------------- |
Posted By: snowman(MI)
Date Posted: 13 May 2020 at 3:35pm
|
Dusty if you want to see what an 80 series and a 70 series 3 point two bottom looks like, I have one of each. Not for sale, but you can look at for measurements for possibilities. snowman(MI) ------------- 1950 WD, 1966 D-10 III, 1961 D-10 II, 1966 D-15 II Gas, A-C Minibike, 917 Hydro Mower, 917 Hydro Blower w/cab, West Michigan "Allis Express" |
Posted By: DennisA (IL)
Date Posted: 13 May 2020 at 7:31pm
  ------------- Thanks & God Bless Dennis |
Posted By: ICTRCTR
Date Posted: 13 May 2020 at 9:33pm
| se nebr, have a 2 btm. 3 point slat mouldboard plow it is a roll over. Allis of course |
Posted By: Pat the Plumber CIL
Date Posted: 14 May 2020 at 6:54am
|
They made them but not many and hard to come by . At the GOTO in Pontiac there were a couple . I seen one on Craigslist earlier this year , rough shape and 120 miles away . Still kicking myself for not taking the time to go get it. ------------- You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails 1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF. |
Posted By: JoeO(CMO)
Date Posted: 16 May 2020 at 9:38am
|
Sorry about the pic above being turned ------------- |