side winder
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170965
Printed Date: 09 Oct 2025 at 9:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: side winder
Posted By: Dusty MI
Subject: side winder
Date Posted: 09 May 2020 at 2:31pm
 I call this my side winder. I have a lot of pine trees with branches that hang down to the ground. this works real nice Dusty
------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Replies:
Posted By: jaybmiller
Date Posted: 09 May 2020 at 2:49pm
|
oK, THAT'S NEAT !!! NOW.... what's the specs on the electric motor and genny and I asume the drive belt is twisted ?? ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: john(MI)
Date Posted: 09 May 2020 at 7:39pm
|
Nice, a lot of innovation right there. I would like one of those but I'm too old and lazy to make it. ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: Ted in NE-OH
Date Posted: 09 May 2020 at 8:21pm
|
Would be great for mowing the edge of ponds and close to ditches. ------------- CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914 |
Posted By: steve(ill)
Date Posted: 09 May 2020 at 8:24pm
|
what HP is the electric motor ?... what is the mower deck width ? ------------- Like them all, but love the "B"s. |
Posted By: Dusty MI
Date Posted: 09 May 2020 at 8:26pm
|
The generator is a 4000 watt duel voltage 115/230 volt. Also a little different is a switch that allows a straight 115 v 4000 watt. It has a 120v 15a duplex and a 230v duplex and a 230v receptacle. I forget the hp of the motor, but it's about all the generator can handle. I'm running it at 115v just because I had the electrical parts on hand, and I also use it to run other things at times. Dusty The deck is from my 917h garden tractor, 48", I've got 3 of those decks.
------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: NE GA Allis
Date Posted: 09 May 2020 at 8:27pm
|
That is an awesome rig!! I think I’d use my sickle mower though. Already have all that stuff. Did you size the motor and generator accordingly or just guess? ------------- Keeping Allis alive with: 2 B’s, 1 C, 6 CA’s, 2 WD’s, 1 WD45, 3 D15D’s, 1 D17 |
Posted By: NE GA Allis
Date Posted: 09 May 2020 at 8:30pm
Dang you replied “seconds” before me  Awesome rig!! ------------- Keeping Allis alive with: 2 B’s, 1 C, 6 CA’s, 2 WD’s, 1 WD45, 3 D15D’s, 1 D17 |
Posted By: Dusty MI
Date Posted: 09 May 2020 at 8:36pm
|
I had the motor in stock, I wish it was a little larger, but the generator might start a bigger motor. It runs it Ok, but it has hands full starting it. I have a volt meter I watch when I'm running the generator, which is really needed to know where to set the throttle. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |