Adjusting rear wheels on 7020
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170906
Printed Date: 04 Sep 2025 at 10:13am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Adjusting rear wheels on 7020
Posted By: Blustery Knoll Farm
Subject: Adjusting rear wheels on 7020
Date Posted: 07 May 2020 at 3:37pm
| Looks like I need some special bolts to remove the wedges. Where can I find a set of these? |
Replies:
Posted By: Boss Man
Date Posted: 07 May 2020 at 3:41pm
| Agco if you have really deep pockets. Been few years, but last I priced they were around $90 a piece |
Posted By: Joe(TX)
Date Posted: 07 May 2020 at 4:54pm
|
post from a few weeks ago https://www.allischalmers.com/forum/jack-bolts-for-7000-8000-series-wanted_topic169357_post1422833.html?KW=wedge#1422833" rel="nofollow - https://www.allischalmers.com/forum/jack-bolts-for-7000-8000-series-wanted_topic169357_post1422833.html?KW=wedge#1422833 ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: A-C_220
Date Posted: 07 May 2020 at 5:32pm
| A dealer should let you borrow a set |
Posted By: plummerscarin
Date Posted: 07 May 2020 at 8:56pm
| My accountant calls them the "golden bolts". But they work like a charm. |
Posted By: DrAllis
Date Posted: 08 May 2020 at 7:08am
| And it takes a total of FOUR. |
Posted By: Blustery Knoll Farm
Date Posted: 08 May 2020 at 11:49am
I found that thread from a couple years back. Two might work some of the time, but I don't see why anyone would argue that two is better than 4. I might try fighting with the front axle on my 7040 since it has power adjust wheels on the rear. Front axle is free on the 7020 though. |
DrAllis wrote: