AC HD5 part
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170839
Printed Date: 18 May 2025 at 2:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC HD5 part
Posted By: BBLUI2
Subject: AC HD5 part
Date Posted: 05 May 2020 at 6:46pm
|
I am looking for a grease boot for an 1954 Allis Chalmers HD5
dozer. My dad calls the part it goes on a clutch brake. I believe it is a power
transfer clutch boot. All the parts houses around our area have no idea what it
is or what it’s called. Can anyone assist me in identifying this and/or give me a site where I can purchase one as this one is shot! |
Replies:
Posted By: DiyDave
Date Posted: 06 May 2020 at 4:47am
Try searching for rubber bellows or bellows boot... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: gemdozer
Date Posted: 06 May 2020 at 10:58am
| This boot should be the boot brake operating rod or the small boot for locking plunger and should have some on racking |
Posted By: Ages Cat
Date Posted: 06 May 2020 at 4:57pm
|
I believe these are available from Western Gear in Boise, ID. ------------- Curt Anderson HD3, HD5B, HD6AG,HD6B dozer, I-400,615, 616,620,720,ACP25 lift truck, 1956 D Grader, AC 540 loader, AC #84 plow, Simplicity tractors, Agco MT225, Agco 2025, |
Posted By: rcwitzel
Date Posted: 07 May 2020 at 8:25am
| That appears to be the Locking Plunger Boot. Early tractors had a 1.5 inch boot with wire clamps. Later tractors had a 2 inch boot with hose clamps. Looks like you have the early version. I have a used one. PM me if interested. |
Posted By: wayne IA
Date Posted: 07 May 2020 at 8:38pm
| General Gear lists the boots on the page near the bottom for $11. http://www.tpaktopc.net/achd5strcltch.htm" rel="nofollow - http://www.tpaktopc.net/achd5strcltch.htm |