Print Page | Close Window

Wd45 governor???

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170710
Printed Date: 29 Sep 2020 at 12:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Wd45 governor???
Posted By: Acllss puller
Subject: Wd45 governor???
Date Posted: 30 Apr 2020 at 10:01pm
To DrAllis and who ever . We rebuilt our Wd45 engine - high compression and super light pistons and shaved 4ozs off governor weights , seems way to responsive wants to run away with very little throttle movement. Thoughts opinions ideas ? Thanks



Replies:
Posted By: AaronSEIA
Date Posted: 01 May 2020 at 5:41am
Why did you shave the weight? 
AaronSEIA


Posted By: DrAllis
Date Posted: 01 May 2020 at 9:17am
You haven't synch'd the gov linkage to the carb. Engine off. Throttle wide open. Diusconnect link rod from governor arm. The link rod should just slide back into the hole and I'll bet the gov arm is farther back that the link rod. Bend link rod down or bend gover arm forward. 1/8" wrong makes a HUGE difference in governor action.


Posted By: Acllss puller
Date Posted: 02 May 2020 at 7:51pm
Thanks !!!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net