Off color question (Jinma 254)
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170370
Printed Date: 17 May 2024 at 9:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Off color question (Jinma 254)
Posted By: bigcountry48
Subject: Off color question (Jinma 254)
Date Posted: 21 Apr 2020 at 10:45am
|
I’m having a hard time on this one, so I figured I’d tap the wealth of knowledge here. I’ve got a jinma or nortac 254 I’m trying to replace 2nd gear in. I’ve got it split and got down to the shaft second gear rides on, but I cant get the shaft out. I’ve looked over the parts diagram several times, and can’t see what’s holding it up. Besides maybe pressed on bearings? I’ve taken all the snap rings I can find on the diagram loose. Just wondering if anybody has any information on it, or if there’s some sort of little truck I’m missing. Thanks in advance. ------------- 1950 B, 1952 pulling wd, and 1954 wd45 |
Replies:
Posted By: john(MI)
Date Posted: 21 Apr 2020 at 4:43pm
|
I don't know nothing about what you are doing, but if it was in second gear when you stated would that make a difference? ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: shameless dude
Date Posted: 22 Apr 2020 at 2:59am
| could it be part of the shaft? |
Posted By: DiyDave
Date Posted: 22 Apr 2020 at 4:43am
When I was way younger, I bought one of these, It was the biggest POS that the chinese ever exported to the US. Add 30 years, and one chinese kung flu virus, and I say, its still a close call, as to which is worse.... Good luck, none the less ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |