Ready to pull & no place to go
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169928
Printed Date: 26 Apr 2024 at 4:28am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Ready to pull & no place to go
Posted By: PaulB
Subject: Ready to pull & no place to go
Date Posted: 08 Apr 2020 at 12:43pm
After selling the CA (minus the turbo) a couple years ago, I really haven't had a good "go fast" ride. Now that I've swapped a motor built just for the turbo and got it into the D10, I'm ready to go somewhere, anywhere, as everything is cancelled at least through the end of April. I'm wondering if the ones for May will be cancelled as well. I plan on pulling 2500 to 3500. I even want to try the 16.4X16.1 tires from the other tractor and go up against the 2000 pound V8 MiniMods later this summer. I'm figuring that with the little tires I can run 4th gear, for a real fun ride.  ------------- If it was fun to pull in LOW gear, I could have a John Deere. If you can't make it GO... make it SHINY |
Replies:
Posted By: dawntreader74
Date Posted: 08 Apr 2020 at 10:39pm
| trying to put one back together also' but may not even have any hook's june' july' or even later? |
Posted By: Sugarmaker
Date Posted: 09 Apr 2020 at 7:41am
|
Yea pretty sure our June pull is not going to happen unless there is some magic? Have my dedicated antique puller with new tires and may not be testing it for a while?? Can we have a pull with social distancing and masks? Maybe?? No one really has to hug anyone at these events. Registration would be no worse than standing in line at the store. Do the 6 foot thing. Might not be much of a crowd but sometimes there are not meany spectators anyway? Not sure how/when a lot of sporting events are going to look in the near future? Anyway I am ready and looking forward to it like Paul too. Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |
Posted By: Ronnie
Date Posted: 14 Apr 2020 at 1:50pm
| Same hear |
Posted By: bradley6874
Date Posted: 24 May 2020 at 12:14pm
|
Our May Tractor Pulls are a GO! 🚜 We will be hosting our first 2020 pulls finally on May 31 at our usual track located at the Montour-DeLong fairgrounds in Washingtonville. This event is not a benefit pull. We respectfully request that, even though Montour County will be in the green phase, please continue to practice “social distancing” to ensure the safety and good health of our all members, pullers, volunteers & spectators. Thank you in advance. Our food concessions will be available too with new menu items! 🍔 🥤 See you there! ------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul |
Posted By: bradley6874
Date Posted: 24 May 2020 at 12:15pm
|
Okay here you go they had one listed on their website I sent them an email and ask about the pull on the 31st and that's what I got back it looks like it's a go for them so now we all got somewhere to go http://mafmca.org/" rel="nofollow - http://mafmca.org/ ------------- You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul |
Posted By: Steve in NJ
Date Posted: 26 May 2020 at 9:14am
|
Hey Paul! What's that thing stickin' out there with all the air cleaners stacked on it? LOL!! Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: PaulB
Date Posted: 27 May 2020 at 6:41am
Whatever it is, it along with what's under that bubble in the hood scares the bejeesus out of the GRAMPA GEAR pullers  ------------- If it was fun to pull in LOW gear, I could have a John Deere. If you can't make it GO... make it SHINY |
Posted By: nella(Pa)
Date Posted: 27 May 2020 at 7:06am
Hey Steve, I think you asked for some classified info. and you got a fake news obama answer!!
 |
Steve in NJ wrote: