Construction and other equipment - allis chalmers hd 16 ac torque converter seal

allis chalmers hd 16 ac torque converter seal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169916
Printed Date: 18 May 2025 at 2:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: allis chalmers hd 16 ac torque converter seal

Posted By: lunchbox06
Subject: allis chalmers hd 16 ac torque converter seal
Date Posted: 07 Apr 2020 at 10:36pm

i have a hd 16 ac serial number 1068 and im pouring fuel out of my torque converter. anyone know how to change that seal? do i have to pull the whole converter or can i just take the rear plate off to get to the seal. also does anyone know where i might be able to find the part to replace the seal. i have the part number if it helps just let me know. any help would be great thanks.

Replies:

Posted By: CAL(KS)
Date Posted: 08 Apr 2020 at 7:14am

go to http://minnpar.com" rel="nofollow - http://minnpar.com and put in your seal #.

you can also try the oem seal makers.

http://www2.chicago-rawhide.com/popup_parts_lookup_457012.htm" rel="nofollow - http://www2.chicago-rawhide.com/popup_parts_lookup_457012.htm

https://drivcat.com/PartInterchange.aspx?" rel="nofollow - https://drivcat.com/PartInterchange.aspx?

the first link is for AC parts supplier.

the second 2 are SKF and National seals cross # and most AC numbers will cross on 1 or the other. if it doesnt come up with these 3, you will have to try to match up by dimensions. I have had pretty good luck coming up with seals and bearings this way even back to 1937 UC tractor.

EDIT> just looked at my HD20 parts book and the output seal is a multipiece job.. soo this route may not work if its the same on a 16 unless minnpar happens to have the KIT.

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15

Posted By: lunchbox06
Date Posted: 08 Apr 2020 at 8:21am

Do you know if to change that I'm going to have to put the whole converter to change it or can I just pull the back cover plate and change it that way. Also would the front seal and real seal be the same or different?

Posted By: CAL(KS)
Date Posted: 08 Apr 2020 at 9:37am

i have no idea. my 16 is direct drive and HD20 is new to me. hopefully never have to mess with a converter.

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15