WD clutch pedal
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169730
Printed Date: 02 Apr 2026 at 4:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD clutch pedal
Posted By: Huolti
Subject: WD clutch pedal
Date Posted: 02 Apr 2020 at 3:51pm
|
Restoring a WD. trying to get transmission clutch pedal off so I can put some bushings in it. Can not just slide it off as the tractor frame is in the way. Any suggestions?
|
Replies:
Posted By: CTuckerNWIL
Date Posted: 14 Apr 2020 at 7:45am
If need be, you can take one frame rail clear off, as long as it's sitting still
Moved to Farm Equipment page from "Forum Talk".
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: Lonn
Date Posted: 14 Apr 2020 at 7:59am
Might take a big breaker bar to crack the rear bolts in the frame rail.
-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
Posted By: MACK
Date Posted: 14 Apr 2020 at 8:15am
|
Take brake pedals loose and slide shaft to right side. MACK
|
Posted By: Sugarmaker
Date Posted: 14 Apr 2020 at 2:57pm
|
yep What MAC said. Check shaft for wear too. Usually half of the wobble is wear in the shaft too. Regards, Chris
-------------
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet, 66 F100.
|
Posted By: Lon(MN)
Date Posted: 15 Apr 2020 at 7:38am
|
Everyone I do gets a new shaft, right brake pedal and engine clutch pedal bushed.
|
|