82s sickle mower questions
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169715
Printed Date: 03 May 2024 at 4:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 82s sickle mower questions
Posted By: Dadscad3
Subject: 82s sickle mower questions
Date Posted: 02 Apr 2020 at 7:42am
|
I just bought a side mount sickle mower for my WD 45. it missing a few parts. Does anybody know how long and the size of the lift hydraulic ram i need? Im also missing the pulley attachment for the pto shaft that goes on back of the tractor, and missing the belt guard for the drive pulley set up on the back. I know very little about this set up and any help would be great! Thank you! |
Replies:
Posted By: Lonn
Date Posted: 02 Apr 2020 at 7:54am
|
8" stroke and I think mine has a 1-1/2" or 2" diameter. ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: Dadscad3
Date Posted: 02 Apr 2020 at 10:15pm
| Thank you for the info! |
Posted By: HD6GTOM
Date Posted: 03 Apr 2020 at 7:38pm
Make sure you get the right pulley for the PTO shaft. Dad had a MT John Deere with a belly mower. It had the wrong PTO pulley. It ran the sickle too slow. As a result I could only mow in low gear. Talk about booring. 
|
Posted By: AC720Man
Date Posted: 03 Apr 2020 at 8:11pm
|
I have a 82 S on my WD. I can get you some measurements tomorrow. I also my know of someone that may reproduce the rear shield for you. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 03 Apr 2020 at 8:17pm
|
Which pulley? The one that slides onto the pto shaft of the tractor or the pulley attached to the pto shaft coming from the mower? Just so i am getting the correct measurements. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 03 Apr 2020 at 8:22pm
|
After I read your post again are you missing the entire drive assembly that attaches to the rear of the tractor? ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 04 Apr 2020 at 6:57am
|
Pulley at mower pto shaft is 5-3/8"x1-1/8" wide. Pto shaft pulley on tractor is 7"x-1-1/8" wide. Belt is 7/8"x 52" if I remember correctly.    ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: AC720Man
Date Posted: 04 Apr 2020 at 6:59am
|
Sorry for the double pic, and have no idea why it’s sideways ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Mikez
Date Posted: 04 Apr 2020 at 7:39am
| What's the part numbers of them |
Posted By: Kenny L.
Date Posted: 05 Apr 2020 at 10:57pm
|
parts #2 805127 sheave rear drive, #3 805128 spacer, #6 805126 hub rear drive sheave #8 512233 spring for lock pin, #9 pin, quick lock and the other sheave part #10 532034 Part # 4 is used with a D19
  |
Posted By: Dadscad3
Date Posted: 07 Apr 2020 at 7:09am
| I need the pulley set up that goes to the pto shaft of the tractor. That and the belt guard that covers the belt off of that pulley. Thank you for the pics and info! |
Posted By: Dadscad3
Date Posted: 07 Apr 2020 at 8:05am
|