Farm Equipment - 190 rattle in tourqe tube

Print Page | Close Window

190 rattle in tourqe tube

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169670
Printed Date: 29 Sep 2025 at 6:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 rattle in tourqe tube

Posted By: chuck (WI)
Subject: 190 rattle in tourqe tube
Date Posted: 31 Mar 2020 at 9:31pm

I have a 190 that has a rattle in the tourqe tube only when the power director is in high does not do it in neutral or low and goes away after quarter throttle but very noticeable below that, any ieas?

Replies:

Posted By: tbran
Date Posted: 31 Mar 2020 at 9:39pm

Been my experience you have a bearing going down or a tooth off a gear. Will result eventually in break up of high range clutchs… sorry for bummer reply...

-------------
When told "it's not the money,it's the principle", remember, it's always the money..

Posted By: chuck (WI)
Date Posted: 31 Mar 2020 at 10:08pm

No need to be sorry, with my luck I was expecting worse lol, you got me thinking maybe a broken gear tooth because when I shut the tractor off It caries the gra sound right to the end, if that makes any sense.

Posted By: MACK
Date Posted: 01 Apr 2020 at 7:59am

The reduction gear on torque tube shaft also wears splines out causing noise and brakes plates. MACK