Farm Equipment - belly mower pulley

Print Page | Close Window

belly mower pulley

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=16962
Printed Date: 25 Aug 2025 at 11:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: belly mower pulley

Posted By: cabindawg
Subject: belly mower pulley
Date Posted: 21 Aug 2010 at 8:52pm

Need some help...

With a little help from the forum,I was able to get my "B" purring like a kitten.
Unfortunately, one of the bearings in the belly mower went bad. I ruined the pulley getting it off. Anyone know where I can find a pulley to match(Eaton wb-1-40jbiei). I believe the deck is a danco 2587. Can't find anything on line. Any help would be greatly appreciated.

Replies:

Posted By: Murph-NC
Date Posted: 21 Aug 2010 at 9:42pm

The Danco mowers were more common on the small Farmalls I believe. You might check with some folks on some of those forums if no one here can help. I'll be interested though, as my new-to-me CA has a Danco deck.

Posted By: Hubert (Ga)engine7
Date Posted: 22 Aug 2010 at 5:33am

Check with your local industrial bearing supply houses. They should be able to come up with a match.

-------------
Just an old country boy saved by the grace of God.