D 12 Manifold
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169586
Printed Date: 26 Aug 2025 at 7:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D 12 Manifold
Posted By: Tyee II
Subject: D 12 Manifold
Date Posted: 29 Mar 2020 at 1:26pm
|
Been a long time since I was here. I am needing to replace the manifold on my D 12 series 3. looking at the options they look pretty much all the same. Look to be aftermarket offshore cast. Anyone have any experience with these good or bad ? thanks for advance in your replies. While we are sitting tight thought I would do a few projects that have been on the back burner.
|
Replies:
Posted By: PaulB
Date Posted: 29 Mar 2020 at 3:31pm
|
It's been a few years ago that I got a couple from Sandy Lake that were very good quality. I think at the time Brenda had told me that they were getting them done for them rather than buying from a supplier. They were an exact fit and the muffler lined up properly with the hole in the hood. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: WF owner
Date Posted: 29 Mar 2020 at 3:57pm
| Just a suggestion, but you might find a good used manifold on here. |
Posted By: Bill Deppe/AC Salvag
Date Posted: 29 Mar 2020 at 4:27pm
|
Have a couple new ones, $225 + s&h Ia 563 357 2616 |
Posted By: DiyDave
Date Posted: 29 Mar 2020 at 6:14pm
from my experience, about 10-15 years ago, the universal D-10/12/14 offshore cast manifolds move the exhaust pipe about 3/4-1" closer to the left side. some sheet metal timmin may be in the works, if you can't adjust the hood panels to the left, on your tractor...
------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |