HD20 Progress
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169512
Printed Date: 28 Apr 2024 at 10:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD20 Progress
Posted By: CAL(KS)
Subject: HD20 Progress
Date Posted: 27 Mar 2020 at 11:10am
|
For those of you not on the FB page. - I put together a short video of my current progress with the HD20 with the 6-110 GM. I enjoy making the videos but not sold on narrating so please bear with me. I made a proper welding table with the help of a styled wc parts tractor so I have a place to fabricate my exhaust manifold replacement. I reworked the gauge panel as the original gauges were barely readable. Installed full flow oil filters from a later engine and rebuilt the blower. The engine was run long enough to unload and pull into the shed for winter TLC. IT was puking oil everywhere from the exhaust so the reason to rebuild the blower as i suspected the rotor seals.
iv got some photos i will share as well when i find a place to upload them https://photos.app.goo.gl/LMG9a7AKg9MXZF9W7" rel="nofollow - https://photos.app.goo.gl/LMG9a7AKg9MXZF9W7
[TUBE]qO2XztlvnpI[/TUBE]
-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Replies:
Posted By: NomoreJohnDeere
Date Posted: 27 Mar 2020 at 8:04pm
|
What does it weigh?
-------------
HD3
|
Posted By: LeonR2013
Date Posted: 28 Mar 2020 at 12:42pm
|
Cal-Ks, you've taken on major project there. Don't let something fall on you. It's really quite amazing what some of you guys get into. But I remember welding up a D-7 blade that was badly cracked and we didn't have to haul it off to the Cat House. Saved the old boy a pile of money. Man those were the good old days. Leon
|
Posted By: DMiller
Date Posted: 28 Mar 2020 at 1:33pm
|
The old 110 sounds decent for time spent sitting. By the hard thump while running has one cylinder getting more fuel than rest, oily smoke may clean up once put in a hard power demand.
|
Posted By: injpumpEd
Date Posted: 28 Mar 2020 at 2:08pm
looks like an early EGR system lol!
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: DMiller
Date Posted: 28 Mar 2020 at 3:12pm
Posted By: CAL(KS)
Date Posted: 30 Mar 2020 at 7:17am
|
42 thousand lbs bare tractor so how much more with blade and cable control? several thousand i would say.
Dmiller. If you look close in the video you can see #5 smoke is a little different but sounds to me like a miss almost. when you rev it up it clears up. this injector was not returning fully when the valve cover was pulled to check the rack, but it was sprayed down with penetrant and worked loose. hoping it would clear up with some good fuel and additive and a bit of loading. i dont recall what # the injectors are and the new valve cover gasket/ oring was a ***** to keep on so not wanting to pull just yet.
-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
|