7040 Powershift Parking Cable
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169424
Printed Date: 28 May 2024 at 6:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7040 Powershift Parking Cable
Posted By: Red Bank
Subject: 7040 Powershift Parking Cable
Date Posted: 24 Mar 2020 at 7:43pm
| Tractor won’t go in park. We pulled floor pan and tried to lube up cable and work it back and forth. I think I need to replace it does anyone know the Agco number for the cable or recommend aftermarket resource? |
Replies:
Posted By: MACK
Date Posted: 24 Mar 2020 at 9:10pm
| Make sure the small cable is moving shifter far enough. MACK |
Posted By: 210Postin
Date Posted: 24 Mar 2020 at 9:13pm
|
have cables instock for everything on that tractor |
Posted By: plummerscarin
Date Posted: 25 Mar 2020 at 7:25am
|
I just got a 7040 with the same problem. I put new cables in as suggested. It shifts much easier but still wouldn't go into park. The short cable I could not shorten enough to pull into park. Look at the area I circled. The curved link is moved when you put shift lever in the park gate. That curve area was extremely worn so I took it out and built it up with a few passes with the welder. Goes into park much easier now. 
|
Posted By: DrAllis
Date Posted: 25 Mar 2020 at 7:38am
| An area that needs some spray lube shoved down in there a couple of times per year. |
Posted By: plummerscarin
Date Posted: 25 Mar 2020 at 7:48am
| Good idea. Chain/cable lubes? |
Posted By: DrAllis
Date Posted: 25 Mar 2020 at 9:16am
| Anything is better than nothing. Chain lube probably stays longer. |