Part numbers for CA hydraulic pump rebuild?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169406
Printed Date: 27 Jul 2025 at 10:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Part numbers for CA hydraulic pump rebuild?
Posted By: Hunt4Allis
Subject: Part numbers for CA hydraulic pump rebuild?
Date Posted: 24 Mar 2020 at 5:11am
|
I have a different thread on here about my pump but I'm looking for specific part numbers to rebuild the hydraulic pump on my CA 1953. Also where to buy individual o-rings and springs needed would be helpful, I've looked on AGCO website but all I'm seeing is a entire kit... Thanks Matt 👍 |
Replies:
Posted By: jaybmiller
Date Posted: 24 Mar 2020 at 5:42am
|
When I 'rebuilt' mine..... actually a really, really good cleaning, I didn't buy any parts. I KNOW the check balls didn't go back into their original holes after 1 went 'walkabout' in the garage. Since it did kinda work before, just tear it down, clean it up,reinstall and odds are it'll work fine 30 seconds after tractors running. Sure can't hurt to try and it'll be a fun way to kill an afternoon..unless a check ball goes 'walkabout'...... ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Alvin M
Date Posted: 24 Mar 2020 at 5:49am
| Agco On Page 117 Has All The Parts Brake Down |
Posted By: Hunt4Allis
Date Posted: 24 Mar 2020 at 6:23am
I see page 131 now here It seams to have other parts associated with components of the tractor that have nothing to do with the hydraulic pump. Now I need to know what numbers build this hydraulic pump for a 53' CA... Is there a exploded view of my pump somewhere with these numbers? Thanks Matt 👍 |
Posted By: streetguy1
Date Posted: 24 Mar 2020 at 7:15am
| call Brenda at Sandylake she will fix up |
Posted By: Hunt4Allis
Date Posted: 24 Mar 2020 at 7:24am
|
Ahh, thanks |