1937 WC rear rims?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169388
Printed Date: 03 Apr 2026 at 4:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 1937 WC rear rims?
Posted By: randy
Subject: 1937 WC rear rims?
Date Posted: 23 Mar 2020 at 5:59pm
|
What style rims would be on a 1937 WC? I see spoked rims on some. ------------- CA WD WD45 D17 D17 Diesel 7060 8050 8070 |
Replies:
Posted By: Alberta Phil
Date Posted: 23 Mar 2020 at 7:37pm
|
according to Terry Deans's Illustrated Buyers Guide, cast disc type wheels replaced spoke type at serial number 59636. |
Posted By: randy
Date Posted: 23 Mar 2020 at 8:50pm
|
I know this is a bad picture, but are these factory rims? And where could i get a set like these? Thanks Randy  ------------- CA WD WD45 D17 D17 Diesel 7060 8050 8070 |
Posted By: Rick of HopeIN
Date Posted: 23 Mar 2020 at 9:16pm
|
The old sales brochures I have from 34 All Crop and 35 WC timeframe show round spoke rear rims for rubber tires. Flat spoke rears if you ordered steel wheels. My 37 had round spokes rears. The same books show both flat dish steel rims and round spoke rims with rubber tired fronts. The steel wheels for front appear to always be round spokes. Mine has steel dish wheels. I do not know if my wheel equipment is original or not but it was on it when parked.  ------------- 1951 B, 1937 WC, 1957 D14, -- Thanks and God Bless |
Posted By: BEK
Date Posted: 24 Mar 2020 at 9:09am
Agree with above info. My 37 WC was near the end of production for the unstyled tractors. Serial number WC58661. Still has the round spokes. |
Alberta Phil wrote:Posted By: Alberta Phil
Date Posted: 24 Mar 2020 at 9:37am
|
Rick, I would say your wheels are correct for your tractor. The 16 inch six bolt wheels started in '36 at tractor number 23529. They changed again to 16 in. five bolt in '37 at tractor number 59628. |
Posted By: Alberta Phil
Date Posted: 24 Mar 2020 at 10:01am
|
Randy, I'm not sure if those are factory rims or not. They might be the early disc wheels which still used the 11.25 X 24 tire. Any pictures I've come across always show the early disc wheel with a wheel weight attached. The 28 inch rims came out after tractor number 81757. |
Posted By: randy
Date Posted: 24 Mar 2020 at 12:27pm
|
The tire is a 13x24 inch tires. He is a better picture. The owner wants to know if i can find new rims for it. I might have to patch the rot in the rims. Thanks, Randy
------------- CA WD WD45 D17 D17 Diesel 7060 8050 8070 |
Posted By: randy
Date Posted: 24 Mar 2020 at 12:29pm
Forgot the pic. Here it is ------------- CA WD WD45 D17 D17 Diesel 7060 8050 8070 |
Posted By: Rick of HopeIN
Date Posted: 24 Mar 2020 at 2:06pm
|
These guy had reasonable small rims I just bought a while back. Very helpful on the phone to give additional dimensions, etc. https://www.heywheel.com/page11.html" rel="nofollow - https://www.heywheel.com/page11.html ------------- 1951 B, 1937 WC, 1957 D14, -- Thanks and God Bless |
Posted By: Alberta Phil
Date Posted: 24 Mar 2020 at 2:33pm
|
You might have to repair those ones. They are deep drop center rims and pretty hard to find. |