Jack bolts for 7000 / 8000 series Wanted
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169357
Printed Date: 08 Jun 2024 at 7:33am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Jack bolts for 7000 / 8000 series Wanted
Posted By: WLHD21
Subject: Jack bolts for 7000 / 8000 series Wanted
Date Posted: 22 Mar 2020 at 9:20pm
| Need a set of jack bolts for the 8070 |
Replies:
Posted By: nickia
Date Posted: 22 Mar 2020 at 9:45pm
|
where in iowa are you from I have a set I could loan ya if I can find them? |
Posted By: Lynn Marshall
Date Posted: 22 Mar 2020 at 9:48pm
| I think that I have an extra set.Will check in the morning. Central Iowa location. I do have a spare set for the 100 series tractors. |
Posted By: Unit3
Date Posted: 22 Mar 2020 at 10:29pm
|
I can help too. Got a couple of coffee cans of them. ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |
Posted By: WLHD21
Date Posted: 23 Mar 2020 at 6:32am
| Phone number 563-380-4509 thanks for the quick response |
Posted By: jaybmiller
Date Posted: 23 Mar 2020 at 6:35am
|
OK, humour me, WHAT are 'jack bolts' ? watchin Shamless 'dontaions' coming down..... Jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Lynn Marshall
Date Posted: 23 Mar 2020 at 7:49am
| I do have extra sets of the big bolts and also have a set for the smaller series too.$150.00 a set for either size. Freight not included. |
Posted By: WLHD21
Date Posted: 23 Mar 2020 at 9:35am
| Jack bolts are used to release the wedge locks on the rear wheel castings to the axel shaft, |
Posted By: Amos
Date Posted: 23 Mar 2020 at 11:04am
| The larger size are the same ones that fit a 9110 Case IH...I happen to know as some how our 210 ones disappeared but the 9110 still had them in the cab, have worked those many times over the years since I found that out and they sit on a shelf in the shop now, not in the tractor they fit... |
Posted By: plummerscarin
Date Posted: 23 Mar 2020 at 11:17am
 
|
Posted By: DougG
Date Posted: 23 Mar 2020 at 12:37pm
| Very nice pictures and info on the last posts, I have ruined a few by not cleaning out the threads good and getting in a hurry, |
Posted By: Mikez
Date Posted: 23 Mar 2020 at 7:23pm
| What's the part number, |
Posted By: Joe(TX)
Date Posted: 23 Mar 2020 at 7:55pm
|
70265185 I think ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: Mikez
Date Posted: 24 Mar 2020 at 10:48pm
| Thanks joe |
Posted By: Calvin Schmidt
Date Posted: 27 Mar 2020 at 6:57am
|
You can get a 7/8" x 12 tap to clean the threads in the wedge. I have a local Mennonite shop make jack bolts for me. ------------- Nothing is impossible if it is properly financed |