D-19 fresh out of the shop
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=16901
Printed Date: 23 Aug 2025 at 12:23pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D-19 fresh out of the shop
Posted By: Butch(OH)
Subject: D-19 fresh out of the shop
Date Posted: 20 Aug 2010 at 4:24pm
Another A-C that was prime to be knocked in the head that good ole Butch saved. I realy need to quit doing this, it's too dang hard on the bank accounts. I got this tractor in a trade, motor was junk, no fenders and more rust and mechanical problems than you care to read about. Parts came from all over to save it and thanks to all of you that supplied them. We added the narrow front because I think they look Kool. Mismatched 9.5L fronts dont loook so good but I cant se them from the seat.
   |
Replies:
Posted By: BobH
Date Posted: 20 Aug 2010 at 4:47pm
| FIX THAT GRILL,lol.Nice job Butch. |
Posted By: omahagreg
Date Posted: 20 Aug 2010 at 4:47pm
|
Looks good from my house! Very nice! ------------- Greg Kroeker 1950 WD with wide front and Freeman trip loader |
Posted By: Butch(OH)
Date Posted: 20 Aug 2010 at 4:55pm
|
BobH wrote:Posted By: BobH
Date Posted: 20 Aug 2010 at 5:17pm
| just pickin on ya |
Posted By: CTuckerNWIL
Date Posted: 20 Aug 2010 at 5:21pm
|
Looks good, Butch. I always liked the narrow fronts on the D series.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: ChuckLuedtkeSEWI
Date Posted: 20 Aug 2010 at 5:40pm
| Is that the D19 that was in your shop two falls ago Butch, or another one? Either way it looks beautiful. My dad still talks about seeing all your tractors, like it was yesterday. |
Posted By: Butch(OH)
Date Posted: 20 Aug 2010 at 8:12pm
Yes Chuck, Its the same ole 19. Here is another pic with less of the grill showing for Bob, LOL
 |
Posted By: clovis
Date Posted: 20 Aug 2010 at 8:41pm
|
Nice!!!!! Great job!!!!! |
Posted By: BrettPhillips
Date Posted: 20 Aug 2010 at 8:51pm
| Power Steering all better? When you said you had bought a gallon of paint, I figured it wouldn't be long! |
Posted By: David Maddux
Date Posted: 20 Aug 2010 at 9:25pm
| It would look nice with a rack of weights on the front. |
Posted By: NC Bruce
Date Posted: 20 Aug 2010 at 9:34pm
|
Beautiful Job!
What paint and where did you get it? Metal work is awesome!
|
Posted By: scott
Date Posted: 20 Aug 2010 at 9:44pm
| Looks like a tight squeeze to get er into or out the shop door! |
Posted By: Doug northern IL
Date Posted: 20 Aug 2010 at 11:04pm
| nice tractor i want the shop |
Posted By: AllisChalmers37
Date Posted: 20 Aug 2010 at 11:55pm
|
Strange, I thought I lived in Allis-Chalmers Country. LOL! ------------- 1937 WC, 1950 CA, 1959 D14, 1967 190XT, 2006 Ram 3500 |
Posted By: bigfish_Oh
Date Posted: 21 Aug 2010 at 12:02am
|
I am beginning to like the nf after getting my 17 and seeing this fine 19, sharp. Did you just get it done in time for the boys to be off to school and leave you short handed? ------------- 1941 WC sat for 29 years,started & dynoed 27 h.p. 1957 WD45 Grandpa bought new,factory p.s.,added wfe 1951 WD, factory p.s. 1960 D14 HnMk IV BkHoe 4 sale 2014 HD Tri Glide 2009 GMC CC SLT Dually |
Posted By: redline
Date Posted: 21 Aug 2010 at 12:44am
|
Nice, Nice, Nice! That is a beauty! ------------- If it weren't for the last minute, I wouldn't get anything done! |
Posted By: mjbower
Date Posted: 21 Aug 2010 at 5:43am
| very nice worth every dime |
Posted By: Darrell Roberts
Date Posted: 21 Aug 2010 at 7:28am
| Wow Butch, it sure turned out nice. Great job and thanks for posting. Now you need to post a before picture. I'd love to have a D19 but don't have a clue what I'd ever do with it but for the price you can pick em up for sure seems like it would be cheap horsepower. |
Posted By: Eric[IL]
Date Posted: 21 Aug 2010 at 8:25am
|
It is a very nice tractor. Beautiful paint job! My brother owned a D19 gas until he got tired of it being a gas hog... He ended up trading it for a 190xt diesel. Anyway, I got to run the D19 once on a 1 row corn chopper. It had great power, just liked its fuel too much. But in the 1960s gasoline sold for $0.22 a gallon - right??? |
Posted By: Jim Lindemood
Date Posted: 21 Aug 2010 at 9:49am
| Really nice job -- surely your wife likes it now. If not, you can put it in my barn - LOL |
Posted By: Butch(OH)
Date Posted: 21 Aug 2010 at 11:14am
|
OK, Here is a before pic. We had fixed the better part of the mechanics by this time and found a set of fenders, beat out dents etc. The powersteering is as new now, was sucking air at the pumpshaft seal. We have a brace of weights for the front and dang well need them when pulling 4-16. I have to save up for the $200 set of irons to mount them. The orange paint is PPG Omni urethane. There is 3 quarts on the tractor underlayed with Omni Epoxy primer and surfacers. The cream is Rustolium Almond. Darrell we have no use fo a D-19 either, pulls the firewood trailer easy, but not as easy as the 220 does, LOL.
I had little gelp on this one B fish, the boys is off to school.
 |
Posted By: BLee Mn
Date Posted: 21 Aug 2010 at 9:42pm
|
looks good Butch!!! nice job, lotta work but worth it ------------- Cowboy UP |
Posted By: Steve in NJ
Date Posted: 22 Aug 2010 at 9:06am
|
She came out great Butch, but fix the grille! (I know.. another wisepoor word choice) Pull a nice grille outta' those "Ultra Rare" AC parts you have hidin'. LOL!! Looks sweet! I like the NF to! Steve@B&B |
Posted By: JH Buck
Date Posted: 22 Aug 2010 at 9:08am
| looks great |
Posted By: clovis
Date Posted: 22 Aug 2010 at 10:05am
| That tractor is just sharp!!!! Once again, nice job!!! |
Posted By: Kip-Utah
Date Posted: 22 Aug 2010 at 10:17am
|
One more vote for your choice of a narrow front on this one. NEAT!! Kip ------------- HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!! |