Sherman over and under
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=168544
Printed Date: 28 Apr 2024 at 8:48pm Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Sherman over and under
Posted By: HD6GTOM
Subject: Sherman over and under
Date Posted: 23 Feb 2020 at 1:23am
Does anyone know if they made 1 to fit a B AC? Thanks guys.
|
Replies:
Posted By: DennisA (IL)
Date Posted: 23 Feb 2020 at 6:38am
They made one for the "CA" which should bolt right up on the "B".
------------- Thanks & God Bless
Dennis
|
Posted By: jiminnd
Date Posted: 23 Feb 2020 at 9:16am
I know of some in B but don't know if it was Sherman.
------------- 1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)
|
Posted By: ac fleet
Date Posted: 23 Feb 2020 at 9:40am
The only one I have is in a styled WC. --- Never saw one in any other model of Allis tractors. None of my B's or C's have one. Probably an expensive option at the time.
------------- http://machinebuildersnetwork.com/
|
Posted By: ORBill
Date Posted: 23 Feb 2020 at 1:17pm
I have a Hi-Lo on a B that I believe is a Western-Rue from Western Manufacturing Co., Detroit Michigan. It will fit on a B, C, & CA. It's on a tractor (1 of 12 B's & C's) sitting here waiting restoration that I have't decided exactly what to do with yet. If it was on a CA the published ground speed is 1.17 mph @ 1300 rpm and 14.1 mph @ 1600 rpm. If I could mate a CA trans with B finals I'd be tempted to build a lowered cruiser!!! It would probably be the only one in Oregon. Bill
|
Posted By: DennisA (IL)
Date Posted: 23 Feb 2020 at 4:39pm
jiminnd wrote:
I know of some in B but don't know if it was Sherman. |
I should have been a little better in my reply. I don't know what company made the secondary trans. I just know that a company did. I wish I had one on my "CA", not just for the added gearing but also the added leg room as I'm 6'-4".
------------- Thanks & God Bless
Dennis
|
Posted By: DrAllis
Date Posted: 23 Feb 2020 at 4:47pm
Sherman or Heisler are the two I'm aware of.
|
|