Help Wanted - Rear Wheel Bearing
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=168202
Printed Date: 21 May 2025 at 3:36pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Help Wanted - Rear Wheel Bearing
Posted By: mas123mas
Subject: Help Wanted - Rear Wheel Bearing
Date Posted: 10 Feb 2020 at 12:49am
|
Hi All, New to the group, as I have just purchased a 1948 Allis Chalmers B, that need a little work. I am needing two new Rear Wheel Bearings, has anybody a make / part number for these, or the sizes and description. I am wanting to order the spares before I remove them ideally.  |
Replies:
Posted By: Mikez
Date Posted: 10 Feb 2020 at 12:42pm
| Welcome to the forum. There's some good info on here. Post this question over in the farm equipment section for better results |
Posted By: steve(ill)
Date Posted: 10 Feb 2020 at 1:11pm
|
Rear Axle/Final Drive: Axle Seal- CR #25043 Axle Speedi-Sleeve - CR #99248 Outer Axle Bearing Cone - Timken #368A Outer Axle Bearing Cup - Timken #362 Inner Axle Bearing Cone - Timken #14138A Inner Axle Bearing Cup - Timken #14276 Bull Pinion Seal: CR #13900, National #450456 Bull Pinion Bearing Cone - Timken #14138A Bull Pinion Bearing Cup - Timken #14276 Transmission & Differential: Differential Carrier Seal - CR #11343, National #410163R Differential Carrier/Bull Pinion Speedi-Sleeve - CR #99125 Differential Carrier Cup - Timken #25520 Differential Carrier Cone - Timken #25580 Input Shaft Cup - Timken #15250 Input Shaft Cone - Timken #15120 Input Shaft Seal - CR #11800, National #450162 (471765) ------------- Like them all, but love the "B"s. |
Posted By: Ted J
Date Posted: 12 Feb 2020 at 2:36pm
|
Steve, are these the same for the 'C' ? ------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Posted By: steve(ill)
Date Posted: 19 Feb 2020 at 12:38pm
|
as far as i know the B and C use the same bearings in all locations...... above is what i have used on the B. ------------- Like them all, but love the "B"s. |
Posted By: mas123mas
Date Posted: 20 Feb 2020 at 10:58pm
|
Many thanks. I have now ordered the parts.
|